Package: adduser Status: install ok installed Priority: important Section: admin Installed-Size: 428 Maintainer: Debian Adduser Developers Architecture: all Multi-Arch: foreign Version: 3.152 Depends: passwd (>= 1:4.17.2-5) Suggests: liblocale-gettext-perl, perl, cron, quota Conffiles: /etc/adduser.conf ef23042097ebb0d1075254f888c3c394 /etc/deluser.conf 11a06baf8245fd8d690b99024d228c1f Description: add and remove users and groups This package includes the 'adduser' and 'deluser' commands for creating and removing users. . - 'adduser' creates new users and groups and adds existing users to existing groups; - 'deluser' removes users and groups and removes users from a given group. . Adding users with 'adduser' is much easier than adding them manually. 'Adduser' will choose UID and GID values that conform to Debian policy, create a home directory, copy skeletal user configuration, and automate setting initial values for the user's password, real name and so on. . 'Deluser' can back up and remove users' home directories and mail spool or all the files they own on the system. . A custom script can be executed after each of the commands. . 'Adduser' and 'Deluser' are intended to be used by the local administrator in lieu of the tools from the 'useradd' suite, and they provide support for easy use from Debian package maintainer scripts, functioning as kind of a policy layer to make those scripts easier and more stable to write and maintain. Package: apt Status: install ok installed Priority: required Section: admin Installed-Size: 4480 Maintainer: APT Development Team Architecture: amd64 Version: 3.0.3 Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~) Provides: apt-transport-https (= 3.0.3) Depends: base-passwd (>= 3.6.1) | adduser, sqv (>= 1.3.0), libapt-pkg7.0 (>= 3.0.3), debian-archive-keyring, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libseccomp2 (>= 2.4.2), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libsystemd0 Recommends: ca-certificates Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10) Conflicts: apt-verify, libnettle8 (<< 3.9.1-2.2~) Conffiles: /etc/apt/apt.conf.d/01autoremove 879455db9b938ce287b23383629aedce /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3 Description: commandline package manager This package provides commandline tools for searching and managing as well as querying information about packages as a low-level access to all features of the libapt-pkg library. . These include: * apt-get for retrieval of packages and information about them from authenticated sources and for installation, upgrade and removal of packages together with their dependencies * apt-cache for querying available information about installed as well as installable packages * apt-cdrom to use removable media as a source for packages * apt-config as an interface to the configuration settings * apt-extracttemplates is used by debconf to prompt for configuration questions before installation. Package: base-files Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 350 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 13.8+deb13u5 Replaces: base, dpkg (<= 1.15.0), miscutils Provides: base, usr-is-merged Pre-Depends: awk Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~) Conffiles: /etc/debian_version cdf53c3dcaaec03ab3996c09f9305ac6 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6 /etc/issue d0c7919a5e2641d60400de08201a49e2 /etc/issue.net 37827eb4e7d268f39255c01fc49b009e /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others, and the text of several common licenses in use on Debian systems. Package: base-passwd Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 272 Maintainer: Shadow package maintainers Architecture: amd64 Multi-Arch: foreign Version: 3.6.7 Replaces: base Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145), libselinux1 (>= 3.1~) Recommends: debconf (>= 0.5) | debconf-2.0 Description: Debian base system master password and group files These are the canonical master copies of the user database files (/etc/passwd and /etc/group), containing the Debian-allocated user and group IDs. The update-passwd tool is provided to keep the system databases synchronized with these master files. Package: bash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 7196 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: foreign Source: bash (5.2.37-2) Version: 5.2.37-2+b9 Depends: base-files (>= 2.1.12), debianutils (>= 5.6-0.1) Pre-Depends: libc6 (>= 2.38), libtinfo6 (>= 6) Recommends: bash-completion Suggests: bash-doc Conffiles: /etc/bash.bashrc 72d453119aaa1e96c7c8a7a8fedcf582 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97 Description: GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). . The Programmable Completion Code, by Ian Macdonald, is now found in the bash-completion package. Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html Package: bsdutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 401 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: foreign Source: util-linux (2.41-5) Version: 1:2.41-5 Pre-Depends: libc6 (>= 2.38), libsystemd0 (>= 254) Recommends: bsdextrautils Description: basic utilities from 4.4BSD-Lite This package contains the bare minimum of BSD utilities needed for a Debian system: logger, renice, script, scriptlive, scriptreplay and wall. The remaining standard BSD utilities are provided by bsdextrautils. Homepage: https://github.com/util-linux/util-linux Package: bzip2 Status: install ok installed Priority: standard Section: utils Installed-Size: 113 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 1.0.8-6 Replaces: libbz2 (<< 0.9.5d-3) Depends: libbz2-1.0 (= 1.0.8-6), libc6 (>= 2.34) Suggests: bzip2-doc Description: high-quality block-sorting file compressor - utilities bzip2 is a freely available, patent free, data compressor. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: https://sourceware.org/bzip2/ Package: ca-certificates Status: install ok installed Priority: standard Section: misc Installed-Size: 390 Maintainer: Julien Cristau Architecture: all Multi-Arch: foreign Version: 20250419 Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0 Breaks: ca-certificates-java (<< 20121112+nmu1) Enhances: openssl Description: Common CA certificates Contains the certificate authorities shipped with Mozilla's browser to allow SSL-based applications to check for the authenticity of SSL connections. . Please note that Debian can neither confirm nor deny whether the certificate authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Full responsibility to assess them belongs to the local system administrator. Package: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 18457 Maintainer: Michael Stone Architecture: amd64 Multi-Arch: foreign Version: 9.7-3 Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.48), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgmp10 (>= 2:6.3.0+dfsg), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libsystemd0 (>= 254) Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: https://gnu.org/software/coreutils Package: curl Status: install ok installed Priority: optional Section: web Installed-Size: 495 Maintainer: Debian Curl Maintainers Architecture: amd64 Multi-Arch: foreign Version: 8.14.1-2+deb13u3 Depends: libc6 (>= 2.34), libcurl4t64 (= 8.14.1-2+deb13u3), zlib1g (>= 1:1.1.4) Recommends: bash-completion Description: command line tool for transferring data with URL syntax curl is a command line tool for transferring data with URL syntax, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a busload of other useful tricks. Homepage: https://curl.se/ Package: dash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 207 Maintainer: Andrej Shadura Architecture: amd64 Multi-Arch: foreign Version: 0.5.12-12 Depends: debianutils (>= 5.6-0.1) Pre-Depends: libc6 (>= 2.38) Description: POSIX-compliant shell The Debian Almquist Shell (dash) is a POSIX-compliant shell derived from ash. . Since it executes scripts faster than bash, and has fewer library dependencies (making it more robust against software or hardware failures), it is used as the default system shell on Debian systems. Homepage: http://gondor.apana.org.au/~herbert/dash/ Package: debconf Status: install ok installed Priority: required Section: admin Installed-Size: 497 Maintainer: Debconf Developers Architecture: all Multi-Arch: foreign Version: 1.5.91 Replaces: debconf-tiny Provides: debconf-2.0 Recommends: apt (>= 2.9.11~) | apt-utils, debconf-i18n Suggests: debconf-doc, debconf-kde-helper, debconf-utils, libgtk3-perl, libnet-ldap-perl, libterm-readline-gnu-perl, perl, whiptail | dialog Conflicts: debconf-tiny, whiptail-utf8 (<= 0.50.17-13) Conffiles: /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73 /etc/debconf.conf 1cd82ead5651f0753b1ff6d9b31bd235 Description: Debian configuration management system Debconf is a configuration management system for debian packages. Packages use Debconf to ask questions when they are installed. Package: debian-archive-keyring Status: install ok installed Priority: important Section: misc Installed-Size: 302 Maintainer: Debian Release Team Architecture: all Multi-Arch: foreign Version: 2025.1 Conffiles: /etc/apt/trusted.gpg.d/debian-archive-bookworm-automatic.asc 55eec060916a9d4a0db7560ab4d7bdce /etc/apt/trusted.gpg.d/debian-archive-bookworm-security-automatic.asc bec0a1224f667bcd1e231b874db9bc4f /etc/apt/trusted.gpg.d/debian-archive-bookworm-stable.asc fac2ec9faba2c2d82c70a6e2805c5b79 /etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.asc 1f30ce1ba8532d523017acb1a69c106a /etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.asc 9fbe7b0d8ebb38e240aeec6b0830ac7b /etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.asc 85a4c0e5c747a38509b33562d4c950be /etc/apt/trusted.gpg.d/debian-archive-trixie-automatic.asc 556202307f6f23e343c1ba12790507be /etc/apt/trusted.gpg.d/debian-archive-trixie-security-automatic.asc f421db9e00d9a98c66c396b2a210f52c /etc/apt/trusted.gpg.d/debian-archive-trixie-stable.asc 91c5c0b4f6878239622087c64866c909 Description: OpenPGP archive certificates of the Debian archive The Debian project digitally signs its Release files. This package contains the archive certificates used for that. Package: debianutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 225 Maintainer: Ileana Dumitrescu Architecture: amd64 Multi-Arch: foreign Version: 5.23.2 Pre-Depends: libc6 (>= 2.38) Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~) Description: Miscellaneous utilities specific to Debian This package provides a number of small utilities which are used primarily by the installation scripts of Debian packages, although you may use them directly. . The specific utilities included are: add-shell installkernel ischroot remove-shell run-parts savelog update-shells which Package: debsums Status: install ok installed Priority: optional Section: admin Installed-Size: 107 Maintainer: Debian Perl Group Architecture: all Version: 3.0.2.3 Depends: libdpkg-perl, libfile-fnmatch-perl, perl:any Suggests: bash-completion Conffiles: /etc/cron.daily/debsums 46f711d07a06527203bdc692b0663044 /etc/cron.monthly/debsums b33e9c02ad0c7c693e83cc980d7cbe87 /etc/cron.weekly/debsums 357cbe94a665b971ac63b894213088d6 /etc/default/debsums bfeb4943dea48f281f8e25184bd61baa Description: tool for verification of installed package files against MD5 checksums debsums can verify the integrity of installed package files against MD5 checksums installed by the package, or generated from a .deb archive. Package: diffutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1768 Maintainer: Santiago Vila Architecture: amd64 Version: 1:3.10-4 Replaces: diff Pre-Depends: libc6 (>= 2.38) Suggests: diffutils-doc, wdiff Description: File comparison utilities The diffutils package provides the diff, diff3, sdiff, and cmp programs. . `diff' shows differences between two files, or each corresponding file in two directories. `cmp' shows the offsets and line numbers where two files differ. `cmp' can also show all the characters that differ between the two files, side by side. `diff3' shows differences among three files. `sdiff' merges two files interactively. . The set of differences produced by `diff' can be used to distribute updates to text files (such as program source code) to other people. This method is especially useful when the differences are small compared to the complete files. Given `diff' output, the `patch' program can update, or "patch", a copy of the file. Homepage: https://www.gnu.org/software/diffutils/ Package: dirmngr Status: install ok installed Priority: optional Section: utils Installed-Size: 967 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 (2.4.7-21+deb13u1) Version: 2.4.7-21+deb13u1+b3 Depends: adduser, gpgconf (= 2.4.7-21+deb13u1+b3), init-system-helpers (>= 1.52), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgnutls30t64 (>= 3.8.1), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libldap2 (>= 2.6.2), libnpth0t64 (>= 1.8) Recommends: gnupg (= 2.4.7-21+deb13u1) Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor Enhances: gpg, gpgsm, squid Description: GNU privacy guard - network certificate management service dirmngr is a server for managing and downloading OpenPGP and X.509 certificates, as well as updates and status signals related to those certificates. For OpenPGP, this means pulling from the public HKP/HKPS keyservers, or from LDAP servers. For X.509 this includes Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol updates (OCSP). It is capable of using Tor for network access. . dirmngr is used for network access by gpg, gpgsm, and dirmngr-client, among other tools. Unless this package is installed, the parts of the GnuPG suite that try to interact with the network will fail. Homepage: https://www.gnupg.org/ Package: dpkg Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 6587 Maintainer: Dpkg Developers Architecture: amd64 Multi-Arch: foreign Version: 1.22.22 Depends: tar (>= 1.28-1) Pre-Depends: libbz2-1.0, libc6 (>= 2.38), liblzma5 (>= 5.4.0), libmd0 (>= 0.0.0), libselinux1 (>= 3.1~), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4) Suggests: apt, debsig-verify Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300) Conffiles: /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f Description: Debian package management system This package provides the low-level infrastructure for handling the installation and removal of Debian software packages. . For Debian package development tools, install dpkg-dev. Homepage: https://wiki.debian.org/Teams/Dpkg Package: findutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 2160 Maintainer: Andreas Metzler Architecture: amd64 Multi-Arch: foreign Version: 4.10.0-3 Pre-Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~) Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1) Description: utilities for finding files--find, xargs GNU findutils provides utilities to find files meeting specified criteria and perform various actions on the files which are found. This package contains 'find' and 'xargs'; however, 'locate' has been split off into a separate package. Homepage: https://savannah.gnu.org/projects/findutils/ Package: fontconfig-config Status: install ok installed Priority: optional Section: fonts Installed-Size: 533 Maintainer: Debian freedesktop.org maintainers Architecture: amd64 Multi-Arch: foreign Source: fontconfig Version: 2.15.0-2.3 Depends: debconf (>= 0.5) | debconf-2.0, fonts-dejavu-core | fonts-liberation | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre | fonts-noto-core Breaks: libfontconfig1 (<< 2.13.0) Conffiles: /etc/fonts/conf.d/README ad6182d0b838d9d8f39219a37b88b24d /etc/fonts/fonts.conf 9632eb1c8b4d81e0e300cd733a4beefe Description: generic font configuration library - configuration Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the configuration files and scripts for fontconfig. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: fonts-urw-base35 Status: install ok installed Priority: optional Section: fonts Installed-Size: 15560 Maintainer: Debian Fonts Task Force Architecture: all Multi-Arch: foreign Version: 20200910-8 Replaces: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~) Depends: xfonts-utils Suggests: fonts-freefont-otf | fonts-freefont-ttf, fonts-texgyre Breaks: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~) Conffiles: /etc/X11/fonts/Type1/fonts-urw-base35.alias 32ee9a005b7c7a089bdd5a5c4ee19c89 /etc/X11/fonts/Type1/fonts-urw-base35.scale 1027533ffa7574e6b30b528d72287445 /etc/ghostscript/fontmap.d/10fonts-urw-base35.conf a97fb8d980202e59cc253c9c21bb2d30 Description: font set metric-compatible with the 35 PostScript Level 2 Base Fonts A commercial-quality set of PostScript Type 1 fonts, metric-compatible with the 35 PostScript Language Level 2 Base Fonts. This package contains outlines in .t1 format and metrics in .afm format of the following fonts: . C059 D050000L Nimbus Mono PS Nimbus Roman Nimbus Sans Nimbus Sans Narrow P052 Standard Symbols PS URW Bookman URW Gothic Z003 . This package also makes the fonts available to an X server under both their "urw" names and via fonts.alias under the official "adobe" names. . Extensive remakes of these fonts in the OpenType format are available in the GUST TeX Gyre collection in the fonts-texgyre package. The Cyrillic glyphs added to the now obsolete urwcyr fork of these fonts have been merged into the GNU FreeFont collection available in the fonts-freefont-otf or fonts-freefont-ttf packages. Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts Package: ftp Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 53 Maintainer: xiao sheng wen Architecture: all Multi-Arch: foreign Source: tnftp Version: 20230507-2 Replaces: ftp (<= 0.17-35) Depends: tnftp Description: dummy transitional package for tnftp This is a dummy transitional package transitioning ftp to tnftp. Homepage: https://en.wikipedia.org/wiki/Tnftp Package: gcc-14-base Status: install ok installed Priority: optional Section: libs Installed-Size: 112 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-14 Version: 14.2.0-19 Breaks: gnat (<< 7) Description: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Homepage: http://gcc.gnu.org/ Package: ghostscript Status: install ok installed Priority: optional Section: text Installed-Size: 183 Maintainer: Debian Printing Team Architecture: amd64 Multi-Arch: foreign Version: 10.05.1~dfsg-1+deb13u1 Replaces: ghostscript-x (<< 10.02.0~dfsg-1) Provides: ghostscript-x (= 10.05.1~dfsg-1+deb13u1), postscript-viewer Depends: libgs10 (= 10.05.1~dfsg-1+deb13u1), libc6 (>= 2.34) Suggests: texlive-binaries Breaks: manpages-l10n (<< 4.22) Conflicts: ghostscript-x (<< 10.02.0~dfsg-1) Description: interpreter for the PostScript language and for PDF GPL Ghostscript is used for PostScript/PDF preview and printing. Usually as a back-end to a program such as ghostview, it can display PostScript and PDF documents in an X11 environment. . Furthermore, it can render PostScript and PDF files as graphics to be printed on non-PostScript printers. Supported printers include common dot-matrix, inkjet and laser models. . The suggested texlive-binaries package is only required when using dvipdf. Homepage: https://www.ghostscript.com/ Package: git Status: install ok installed Priority: optional Section: vcs Installed-Size: 49154 Maintainer: Jonathan Nieder Architecture: amd64 Multi-Arch: foreign Version: 1:2.47.3-0+deb13u1 Provides: git-completion, git-core Depends: libc6 (>= 2.38), libcurl3t64-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.2), perl, liberror-perl, git-man (>> 1:2.47.3), git-man (<< 1:2.47.3-.) Recommends: ca-certificates, patch, less, ssh-client Suggests: gettext-base, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15) Conffiles: /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6 Description: fast, scalable, distributed revision control system Git is popular version control system designed to handle very large projects with speed and efficiency; it is used for many high profile open source projects, most notably the Linux kernel. . Git falls in the category of distributed source code management tools. Every Git working directory is a full-fledged repository with full revision tracking capabilities, not dependent on network access or a central server. . This package provides the git main components with minimal dependencies. Additional functionality, e.g. a graphical user interface and revision tree visualizer, tools for interoperating with other VCS's, or a web interface, is provided as separate git* packages. Homepage: https://git-scm.com/ Package: git-man Status: install ok installed Priority: optional Section: doc Installed-Size: 2251 Maintainer: Jonathan Nieder Architecture: all Multi-Arch: foreign Source: git Version: 1:2.47.3-0+deb13u1 Description: fast, scalable, distributed revision control system (manual pages) Git is popular version control system designed to handle very large projects with speed and efficiency; it is used for many high profile open source projects, most notably the Linux kernel. . Git falls in the category of distributed source code management tools. Every Git working directory is a full-fledged repository with full revision tracking capabilities, not dependent on network access or a central server. . This package provides reference documentation for use by the 'man' utility and the 'git help' command. Homepage: https://git-scm.com/ Package: gnupg Status: install ok installed Priority: optional Section: metapackages Installed-Size: 468 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Source: gnupg2 Version: 2.4.7-21+deb13u1 Depends: dirmngr (<< 2.4.7-21+deb13u1.1~), dirmngr (>= 2.4.7-21+deb13u1), gnupg-l10n (= 2.4.7-21+deb13u1), gpg (<< 2.4.7-21+deb13u1.1~), gpg (>= 2.4.7-21+deb13u1), gpg-agent (<< 2.4.7-21+deb13u1.1~), gpg-agent (>= 2.4.7-21+deb13u1), gpgsm (<< 2.4.7-21+deb13u1.1~), gpgsm (>= 2.4.7-21+deb13u1) Recommends: gnupg-utils (<< 2.4.7-21+deb13u1.1~), gnupg-utils (>= 2.4.7-21+deb13u1), gpg-wks-client (<< 2.4.7-21+deb13u1.1~), gpg-wks-client (>= 2.4.7-21+deb13u1), gpgv (<< 2.4.7-21+deb13u1.1~), gpgv (>= 2.4.7-21+deb13u1) Suggests: gpg-wks-server (<< 2.4.7-21+deb13u1.1~), gpg-wks-server (>= 2.4.7-21+deb13u1), parcimonie, xloadimage Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.4.7-21+deb13u1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4) Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the full suite of GnuPG tools for cryptographic communications and data storage. Homepage: https://www.gnupg.org/ Package: gnupg-l10n Status: install ok installed Priority: optional Section: localization Installed-Size: 5010 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Source: gnupg2 Version: 2.4.7-21+deb13u1 Enhances: dirmngr, gpg, gpg-agent Description: GNU privacy guard - localization files GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC 4880. . This package contains the translation files for the use of GnuPG in non-English locales. Homepage: https://www.gnupg.org/ Package: gnupg2 Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 37 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Version: 2.4.7-21+deb13u1 Depends: gnupg (>= 2.4.7-21+deb13u1) Description: GNU privacy guard - a free PGP replacement (dummy transitional package) GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This is a dummy transitional package that provides symlinks from gpg2 to gpg. Homepage: https://www.gnupg.org/ Package: gpg Status: install ok installed Priority: optional Section: utils Installed-Size: 1594 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 (2.4.7-21+deb13u1) Version: 2.4.7-21+deb13u1+b3 Replaces: gnupg (<< 2.1.21-4), keyboxd (<< 2.4.7-4) Provides: keyboxd (= 2.4.7-21+deb13u1+b3) Depends: gpgconf (= 2.4.7-21+deb13u1+b3), init-system-helpers (>= 1.52), libassuan9 (>= 2.5.1), libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libnpth0t64 (>= 1.2), libreadline8t64 (>= 6.0), libsqlite3-0 (>= 3.14.0), zlib1g (>= 1:1.1.4) Recommends: gnupg (= 2.4.7-21+deb13u1) Breaks: gnupg (<< 2.1.21-4), keyboxd (<< 2.4.7-4) Description: GNU Privacy Guard -- minimalist public key operations GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains /usr/bin/gpg itself, and is useful on its own only for public key operations (encryption, signature verification, listing OpenPGP certificates, etc). If you want full capabilities (including secret key operations, network access, etc), please install the "gnupg" package, which pulls in the full suite of tools. Homepage: https://www.gnupg.org/ Package: gpg-agent Status: install ok installed Priority: optional Section: utils Installed-Size: 899 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 (2.4.7-21+deb13u1) Version: 2.4.7-21+deb13u1+b3 Replaces: gnupg-agent (<< 2.1.21-4) Provides: gnupg-agent Depends: gpgconf (= 2.4.7-21+deb13u1+b3), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan9 (>= 2.5.1), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libnpth0t64 (>= 1.2) Recommends: gnupg (= 2.4.7-21+deb13u1) Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon, tpm2daemon Breaks: gnupg-agent (<< 2.1.21-4) Conffiles: /etc/X11/Xsession.d/90gpg-agent 444b1f7d2bc0f05b8fff51f58bd99ed9 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455 Description: GNU privacy guard - cryptographic agent GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the agent program gpg-agent which handles all secret key material for OpenPGP and S/MIME use. The agent also provides a passphrase cache, which is used by pre-2.1 versions of GnuPG for OpenPGP operations. Without this package, trying to do secret-key operations with any part of the modern GnuPG suite will fail. Homepage: https://www.gnupg.org/ Package: gpgconf Status: install ok installed Priority: optional Section: utils Installed-Size: 371 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 (2.4.7-21+deb13u1) Version: 2.4.7-21+deb13u1+b3 Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Depends: libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.48), libreadline8t64 (>= 6.0) Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Description: GNU privacy guard - core configuration utilities GnuPG is GNU's tool for secure communication and data storage. . This package contains core utilities used by different tools in the suite offered by GnuPG. It can be used to programmatically edit config files for tools in the GnuPG suite, to launch or terminate per-user daemons (if installed), etc. Homepage: https://www.gnupg.org/ Package: gpgsm Status: install ok installed Priority: optional Section: utils Installed-Size: 664 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 (2.4.7-21+deb13u1) Version: 2.4.7-21+deb13u1+b3 Depends: gpgconf (= 2.4.7-21+deb13u1+b3), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libnpth0t64 (>= 1.2), libreadline8t64 (>= 6.0) Recommends: gnupg (= 2.4.7-21+deb13u1) Description: GNU privacy guard - S/MIME version GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the gpgsm program. gpgsm is a tool to provide digital encryption and signing services on X.509 certificates and the CMS protocol. gpgsm includes complete certificate management. Homepage: https://www.gnupg.org/ Package: gpgv Status: install ok installed Priority: important Section: utils Installed-Size: 560 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 (2.4.7-21+deb13u1) Version: 2.4.7-21+deb13u1+b3 Depends: libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), zlib1g (>= 1:1.1.4) Suggests: gnupg Breaks: python-debian (<< 0.1.29) Description: GNU privacy guard - signature verification tool GnuPG is GNU's tool for secure communication and data storage. . gpgv is actually a stripped-down version of gpg which is only able to check signatures. It is somewhat smaller than the fully-blown gpg and uses a different (and simpler) way to check that the public keys used to make the signature are valid. There are no configuration files and only a few options are implemented. Homepage: https://www.gnupg.org/ Package: grep Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1266 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 3.11-4 Provides: rgrep Pre-Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.32) Conflicts: rgrep Description: GNU grep, egrep and fgrep 'grep' is a utility to search for text in files; it can be used from the command line or in scripts. Even if you don't want to use it, other packages on your system probably will. . The GNU family of grep utilities may be the "fastest grep in the west". GNU grep is based on a fast lazy-state deterministic matcher (about twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper search for a fixed string that eliminates impossible text from being considered by the full regexp matcher without necessarily having to look at every character. The result is typically many times faster than Unix grep or egrep. (Regular expressions containing backreferencing will run more slowly, however.) Homepage: https://www.gnu.org/software/grep/ Package: gzip Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 256 Maintainer: Milan Kupcevic Architecture: amd64 Version: 1.13-1 Pre-Depends: libc6 (>= 2.38) Suggests: less Conflicts: zutils (<< 1.13-2~) Description: GNU compression utilities This package provides the standard GNU file compression utilities, which are also the default compression tools for Debian. They typically operate on files with names ending in '.gz', but can also decompress files ending in '.Z' created with 'compress'. Homepage: https://www.gnu.org/software/gzip/ Package: hostname Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 50 Maintainer: Michael Meskes Architecture: amd64 Version: 3.25 Replaces: nis (<< 3.17-30) Pre-Depends: libc6 (>= 2.34) Breaks: nis (<< 3.17-30) Description: utility to set/show the host name or domain name This package provides commands which can be used to display the system's DNS name, and to display or set its hostname or NIS domain name. Package: imagemagick-7-common Status: install ok installed Priority: optional Section: graphics Installed-Size: 465 Maintainer: ImageMagick Packaging Team Architecture: all Multi-Arch: foreign Source: imagemagick Version: 8:7.1.1.43+dfsg1-1+deb13u8 Replaces: imagemagick-6-common (<< 8:7.0.0-1~), imagemagick-common (<< 8:6.9.12.98+dfsg1-1~) Provides: imagemagick-6-common (= 8:7.1.1.43+dfsg1-1+deb13u8), imagemagick-common (= 8:7.1.1.43+dfsg1-1+deb13u8) Breaks: imagemagick-6-common (<< 8:7.0.0-1~), imagemagick-common (<< 8:6.9.12.98+dfsg1-1~) Conffiles: /etc/ImageMagick-7/colors.xml 7a58fb76b799bf829c55eecd08db28c2 /etc/ImageMagick-7/delegates.xml fd0d19e16ca3eeac88109d3b4eaaaddd /etc/ImageMagick-7/log.xml 29c0a0702c3729fec215ce53438eb608 /etc/ImageMagick-7/mime.xml 38997fbb930f4a344b0f755278863931 /etc/ImageMagick-7/policy.xml 7e5fc23523a501ccf8146e2439378d68 /etc/ImageMagick-7/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5 /etc/ImageMagick-7/thresholds.xml 88370f6d426e50628949a43a71d1398a /etc/ImageMagick-7/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc /etc/ImageMagick-7/type-dejavu.xml fdb9405e0c0f1f729e6b62cb2f4c9f55 /etc/ImageMagick-7/type-ghostscript.xml e283f0f7916ca637a6bcb713f754d9be /etc/ImageMagick-7/type-urw-base35-type1.xml 97b3389352c8e35aec41bbcc646ac837 /etc/ImageMagick-7/type-urw-base35.xml 857d7928b3ec119f6374e2a856f65290 /etc/ImageMagick-7/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c /etc/ImageMagick-7/type.xml dc579c4388d995a444490ad5de853a2f Description: image manipulation programs -- infrastructure imagemagick-common contains the filesystem infrastructure required for further installation of imagemagick in any configuration; it does not provide a full installation of binaries, libraries, and utilities required to run imagemagick. . This package is independent of channel depth. Homepage: https://www.imagemagick.org/ Package: init-system-helpers Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 133 Maintainer: Debian systemd Maintainers Architecture: all Multi-Arch: foreign Version: 1.69~deb13u1 Description: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e. g. sysvinit or systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which provide an abstraction for enabling, disabling, starting, and stopping services for all supported Debian init systems as specified by the policy. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: iproute2 Status: install ok installed Priority: important Section: net Installed-Size: 3774 Maintainer: Debian Kernel Team Architecture: amd64 Multi-Arch: foreign Version: 6.15.0-1 Replaces: iproute2-doc Provides: arpd Depends: debconf (>= 0.5) | debconf-2.0, libbpf1 (>= 1:0.6.0), libc6 (>= 2.38), libcap2 (>= 1:2.10), libdb5.3t64, libelf1t64 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libtirpc3t64 (>= 1.0.2), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin Suggests: python3:any Breaks: iproute2-doc Conflicts: arpd Description: networking and traffic control tools The iproute2 suite is a collection of utilities for networking and traffic control. . These tools communicate with the Linux kernel via the (rt)netlink interface, providing advanced features not available through the legacy net-tools commands 'ifconfig' and 'route'. Homepage: https://wiki.linuxfoundation.org/networking/iproute2 Package: iputils-ping Status: install ok installed Priority: important Section: net Installed-Size: 187 Maintainer: Noah Meyerhans Architecture: amd64 Multi-Arch: foreign Source: iputils Version: 3:20240905-3 Provides: ping Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6) Recommends: linux-sysctl-defaults Description: Tools to test the reachability of network hosts The ping command sends ICMP ECHO_REQUEST packets to a host in order to test if the host is reachable via the network. . This package includes a ping6 utility which supports IPv6 network connections. Homepage: https://github.com/iputils/iputils/ Package: jq Status: install ok installed Priority: optional Section: utils Installed-Size: 124 Maintainer: ChangZhuo Chen (陳昌倬) Architecture: amd64 Multi-Arch: foreign Version: 1.7.1-6+deb13u2 Depends: libc6 (>= 2.38), libjq1 (= 1.7.1-6+deb13u2) Description: lightweight and flexible command-line JSON processor jq is like sed for JSON data – you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text. . It is written in portable C, and it has minimal runtime dependencies. . jq can mangle the data format that you have into the one that you want with very little effort, and the program to do so is often shorter and simpler than you’d expect. Homepage: https://jqlang.github.io/jq Package: less Status: install ok installed Priority: important Section: text Installed-Size: 376 Maintainer: Milan Kupcevic Architecture: amd64 Multi-Arch: foreign Version: 668-1 Depends: libc6 (>= 2.34), libtinfo6 (>= 6) Description: pager program similar to more This package provides "less", a file pager (that is, a memory-efficient utility for displaying text one screenful at a time). Less has many more features than the basic pager "more". As part of the GNU project, it is widely regarded as the standard pager on UNIX-derived systems. . Also provided are "lessecho", a simple utility for ensuring arguments with spaces are correctly quoted; "lesskey", a tool for modifying the standard (vi-like) keybindings; and "lesspipe", a filter for specific types of input, such as .doc or .txt.gz files. Homepage: http://www.greenwoodsoftware.com/less/ Package: lftp Status: install ok installed Priority: optional Section: net Installed-Size: 2377 Maintainer: Noël Köthe Architecture: amd64 Source: lftp (4.9.2-3) Version: 4.9.2-3+b1 Depends: libc6 (>= 2.38), libgnutls30t64 (>= 3.8.1), libidn2-0 (>= 2.0.0), libreadline8t64 (>= 6.0), libstdc++6 (>= 5), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4), netbase Recommends: ssh-client | openssh-client Conffiles: /etc/lftp.conf 91da91d216208e5f66061bd07f92c1dd Description: Sophisticated command-line FTP/HTTP/BitTorrent client programs Lftp is a file retrieving tool that supports FTP, HTTP, FISH, SFTP, HTTPS, FTPS and BitTorrent protocols under both IPv4 and IPv6. Lftp has an amazing set of features, while preserving its interface as simple and easy as possible. . The main two advantages over other ftp clients are reliability and ability to perform tasks in background. It will reconnect and reget the file being transferred if the connection broke. You can start a transfer in background and continue browsing on the ftp site. It does this all in one process. When you have started background jobs and feel you are done, you can just exit lftp and it automatically moves to nohup mode and completes the transfers. It has also such nice features as reput and mirror. It can also download a file as soon as possible by using several connections at the same time. . Lftp can also be scriptable, it can be used to mirror sites, it lets you copy files among remote servers (even between FTP and HTTP). It has an extensive online help. It supports bookmarks, and connecting to several ftp/http sites at the same time. . This package also includes lftpget - A simple non-interactive tool for downloading files. Homepage: https://lftp.yar.ru Package: libabsl20240722 Status: install ok installed Priority: optional Section: libs Installed-Size: 2561 Maintainer: Benjamin Barenblat Architecture: amd64 Multi-Arch: same Source: abseil Version: 20240722.0-4 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), libstdc++6 (>= 13.1) Description: extensions to the C++ standard library Abseil is an open-source collection of C++ library code designed to augment the C++ standard library. The Abseil library code is collected from Google's C++ codebase and has been extensively tested and used in production. In some cases, Abseil provides pieces missing from the C++ standard; in others, Abseil provides alternatives to the standard for special needs. . This package contains Abseil's shared libraries. Homepage: https://abseil.io/ Package: libacl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 74 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: acl (2.3.2-2) Version: 2.3.2-2+b1 Depends: libc6 (>= 2.38) Description: access control list - shared library This package contains the shared library containing the POSIX 1003.1e draft standard 17 functions for manipulating access control lists. Homepage: https://savannah.nongnu.org/projects/acl/ Package: libaom3 Status: install ok installed Priority: optional Section: libs Installed-Size: 5578 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: aom Version: 3.12.1-1 Depends: libc6 (>= 2.34) Description: AV1 Video Codec Library AOMedia Video 1 (AV1) is an open and royalty free video encoding format optimized for the Internet and the successor of VP9. aom is the reference encoder and decoder implementation published by the Alliance for Open Media. . This package contains the shared library. Homepage: https://aomedia.googlesource.com/aom/ Package: libapparmor1 Status: install ok installed Priority: optional Section: libs Installed-Size: 115 Maintainer: Debian AppArmor Team Architecture: amd64 Multi-Arch: same Source: apparmor Version: 4.1.0-1 Replaces: libapparmor-perl (<< 3.0.3-3) Depends: libc6 (>= 2.38) Breaks: libapparmor-perl (<< 3.0.3-3) Description: changehat AppArmor library libapparmor1 provides a shared library one can compile programs against in order to use various AppArmor functionality, such as transitioning to a different AppArmor profile or hat. Homepage: https://apparmor.net/ Package: libapt-pkg7.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 3855 Maintainer: APT Development Team Architecture: amd64 Multi-Arch: same Source: apt Version: 3.0.3 Provides: libapt-pkg (= 3.0.3) Depends: libbz2-1.0, libc6 (>= 2.38), libgcc-s1 (>= 3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.8), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2.3) Recommends: apt (>= 3.0.3) Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~) Conflicts: libnettle8 (<< 3.9.1-2.2~) Description: package management runtime library This library provides the common functionality for searching and managing packages as well as information about packages. Higher-level package managers can depend upon this library. . This includes: * retrieval of information about packages from multiple sources * retrieval of packages and all dependent packages needed to satisfy a request either through an internal solver or by interfacing with an external one * authenticating the sources and validating the retrieved data * installation and removal of packages in the system * providing different transports to retrieve data over cdrom and http(s) as well as an interface to add more transports like tor+http(s) (apt-transport-tor). Package: libargon2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 58 Maintainer: Debian Security Tools Architecture: amd64 Multi-Arch: same Source: argon2 (0~20190702+dfsg-4) Version: 0~20190702+dfsg-4+b2 Depends: libc6 (>= 2.34) Breaks: cryptsetup-initramfs (<< 2:2.6.1-2) Description: memory-hard hashing function - runtime library Argon2 is a password-hashing function that can be used to hash passwords for credential storage, key derivation, or other applications. . There are two main versions of Argon2: Argon2i and Argon2d. Argon2i is the safest against side-channel attacks, while Argon2d provides the highest resistance against GPU cracking attacks. . Argon2i and Argon2d are parametrized by: * A time cost, which defines the amount of computation realized and therefore the execution time, given in number of iterations * A memory cost, which defines the memory usage, given in kibibytes * A parallelism degree, which defines the number of parallel threads . This package includes the dynamic library against which programs are linked. Homepage: https://github.com/P-H-C/phc-winner-argon2 Package: libassuan9 Status: install ok installed Priority: optional Section: libs Installed-Size: 136 Maintainer: Debian GnuPG-Maintainers Architecture: amd64 Multi-Arch: same Source: libassuan Version: 3.0.2-2 Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.33) Description: IPC library for the GnuPG components Libassuan is a small library implementing the so-called "Assuan protocol". This protocol is used for IPC between most newer GnuPG components. Both server and client side functions are provided. Homepage: https://www.gnupg.org/related_software/libassuan/index.html Package: libatomic1 Status: install ok installed Priority: optional Section: libs Installed-Size: 45 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-14 Version: 14.2.0-19 Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.14) Description: support library providing __atomic built-in functions library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Homepage: http://gcc.gnu.org/ Package: libattr1 Status: install ok installed Priority: optional Section: libs Installed-Size: 60 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: attr Version: 1:2.5.2-3 Depends: libc6 (>= 2.4) Conffiles: /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb Description: extended attribute handling - shared library Contains the runtime environment required by programs that make use of extended attributes. Homepage: https://savannah.nongnu.org/projects/attr/ Package: libaudit-common Status: install ok installed Priority: optional Section: libs Installed-Size: 25 Maintainer: Laurent Bigonville Architecture: all Multi-Arch: foreign Source: audit Version: 1:4.0.2-2 Conffiles: /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2 Description: Dynamic library for security auditing - common files The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. . This package contains the libaudit.conf configuration file and the associated manpage. Homepage: https://people.redhat.com/sgrubb/audit/ Package: libaudit1 Status: install ok installed Priority: optional Section: libs Installed-Size: 179 Maintainer: Laurent Bigonville Architecture: amd64 Multi-Arch: same Source: audit (1:4.0.2-2) Version: 1:4.0.2-2+b2 Depends: libaudit-common (>= 1:4.0.2-2), libc6 (>= 2.38), libcap-ng0 (>= 0.7.9) Description: Dynamic library for security auditing The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. Homepage: https://people.redhat.com/sgrubb/audit/ Package: libavahi-client3 Status: install ok installed Priority: optional Section: libs Installed-Size: 119 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-16 Depends: libavahi-common3 (= 0.8-16), libc6 (>= 2.34), libdbus-1-3 (>= 1.10) Description: Avahi client library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the library for Avahi's C API which allows you to integrate mDNS/DNS-SD functionality into your application. Homepage: https://avahi.org/ Package: libavahi-common-data Status: install ok installed Priority: optional Section: libs Installed-Size: 760 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-16 Description: Avahi common data files Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains common data files for avahi. Homepage: https://avahi.org/ Package: libavahi-common3 Status: install ok installed Priority: optional Section: libs Installed-Size: 96 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-16 Depends: libc6 (>= 2.38), libavahi-common-data (= 0.8-16) Description: Avahi common library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the Avahi common library, which is a set of common functions used by many of Avahis components and client applications. Homepage: https://avahi.org/ Package: libavif16 Status: install ok installed Priority: optional Section: libs Installed-Size: 288 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libavif Version: 1.2.1-1.2 Depends: libaom3 (>= 3.2.0), libc6 (>= 2.34), libdav1d7 (>= 0.1.0), libgav1-1 (>= 0.18.0), librav1e0.7 (>= 0.5.1), libsvtav1enc2 (>= 2.2.1), libyuv0 (>= 0.0.1904) Description: Library for handling .avif files This library aims to be a friendly, portable C implementation of the AV1 Image File Format as described in https://aomediacodec.github.io/av1-avif/. . This package provides the shared library files. Homepage: https://github.com/AOMediaCodec/libavif Package: libblkid1 Status: install ok installed Priority: optional Section: libs Installed-Size: 449 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.41-5 Depends: libc6 (>= 2.38) Description: block device ID library The blkid library allows system programs such as fsck and mount to quickly and easily find block devices by filesystem UUID or label. This allows system administrators to avoid specifying filesystems by hard-coded device names and use a logical naming system instead. Homepage: https://github.com/util-linux/util-linux Package: libbpf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 452 Maintainer: Sudip Mukherjee Architecture: amd64 Multi-Arch: same Source: libbpf (1.5.0-3) Version: 1:1.5.0-3 Depends: libc6 (>= 2.38), libelf1t64 (>= 0.144), zlib1g (>= 1:1.2.3.3) Description: eBPF helper library (shared library) libbpf is a library for loading eBPF programs and reading and manipulating eBPF objects from user-space. . This package contains the shared library. Package: libbrotli1 Status: install ok installed Priority: optional Section: libs Installed-Size: 870 Maintainer: Tomasz Buchert Architecture: amd64 Multi-Arch: same Source: brotli (1.1.0-2) Version: 1.1.0-2+b7 Depends: libc6 (>= 2.29) Description: library implementing brotli encoder and decoder (shared libraries) Brotli is a generic-purpose lossless compression algorithm that compresses data using a combination of a modern variant of the LZ77 algorithm, Huffman coding and 2nd order context modeling, with a compression ratio comparable to the best currently available general-purpose compression methods. It is similar in speed with deflate but offers more dense compression. . This package installs shared libraries. Homepage: https://github.com/google/brotli Package: libbsd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 214 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libbsd Version: 0.12.2-2 Depends: libc6 (>= 2.38), libmd0 (>= 1.0.3-2) Description: utility functions from BSD systems - shared library This library provides some C functions such as strlcpy() that are commonly available on BSD systems but not on others like GNU systems. . For a detailed list of the provided functions, please see the libbsd-dev package description. Homepage: https://libbsd.freedesktop.org/ Package: libbz2-1.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 96 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: bzip2 Version: 1.0.8-6 Depends: libc6 (>= 2.4) Description: high-quality block-sorting file compressor library - runtime This package contains libbzip2 which is used by the bzip2 compressor. . bzip2 is a freely available, patent free, data compressor. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: https://sourceware.org/bzip2/ Package: libc-bin Essential: yes Status: install ok installed Priority: required Section: libs Installed-Size: 2122 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.41-12+deb13u3 Depends: libc6 (>> 2.41), libc6 (<< 2.42) Recommends: manpages Breaks: dh-lua (<< 27+nmu1~) Conffiles: /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6 Description: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Homepage: https://www.gnu.org/software/libc/libc.html Package: libc-dev-bin Status: install ok installed Priority: optional Section: libdevel Installed-Size: 126 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.41-12+deb13u3 Depends: libc6 (>> 2.41), libc6 (<< 2.42) Recommends: manpages, manpages-dev Suggests: libc-devtools (>> 2.41) Description: GNU C Library: Development binaries This package contains utility programs related to the GNU C Library development package. . * gencat: generate message catalogs Homepage: https://www.gnu.org/software/libc/libc.html Package: libc6 Status: install ok installed Priority: optional Section: libs Installed-Size: 13226 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: glibc Version: 2.41-12+deb13u3 Replaces: libc6-amd64 Depends: libgcc-s1 Recommends: libidn2-0 (>= 2.0.5~) Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales, libnss-nis, libnss-nisplus Breaks: base-files (<< 13.3~), chrony (<< 4.2-3~), dhcpcd (<< 1:10.1.0-7~), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), libamdhip64-5 (<< 5.7.1-5+b1), libhiprtc-builtins5 (<< 5.7.1-5+b1), librccl1 (<< 5.4.3-3+b1), libswupdate0.1 (<< 2024.12.1+dfsg-1+b3), locales (<< 2.41), locales-all (<< 2.41), lua-swupdate (<< 2024.12.1+dfsg-1+b3), nscd (<< 2.41), pd-scaf (<< 1:0.14.1+darcs20180201-6+b4), postgresql-15-pllua (<< 1:2.0.12-4), postgresql-17-pllua (<< 1:2.0.12-3+b2), python3-iptables (<< 1.0.0-2), python3-mrgingham (<< 1.25-1), python3-onnxruntime (<< 1.20.1+dfsg-2~), sysvinit (<< 3.09-2~), sysvinit-core (<< 3.09-2~), tinydns (<< 1:1.05-14), uwsgi-plugin-pypy3 (<< 0.0.2+b1), valgrind (<< 1:3.19.0-1~) Conffiles: /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab Description: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Homepage: https://www.gnu.org/software/libc/libc.html Package: libc6-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 12542 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: glibc Version: 2.41-12+deb13u3 Replaces: libc6 (<= 2.32-1) Provides: libc-dev (= 2.41-12+deb13u3) Depends: libc6 (= 2.41-12+deb13u3), libc-dev-bin (= 2.41-12+deb13u3), linux-libc-dev, libcrypt-dev, rpcsvc-proto Suggests: glibc-doc, manpages-dev Breaks: binutils (<< 2.38), catch (<< 1.12.2-0.1), heimdal-multidev (<= 7.7.0+dfsg-4), igblast (<= 1.19.0-1), libassimp-dev (<= 5.2.4~ds0-1), libasyncns-dev (<= 0.8-6+b2), libatm1-dev (<= 1:2.5.1-4), libaws20-dev (<= 20.2-2+b1), libboinc-app-dev (<= 7.20.2+dfsg-1), libbson-dev (<= 1.22.0-1), libc6-dev-amd64-cross (<< 2.41~), libcups2-dev (<= 2.4.2-1), libdeal.ii-dev (<= 9.4.0-1), libdkim-dev (<= 1:1.0.21-4+b2), libdolfin-dev-common (<= 2019.2.0~git20220407.d29e24d-5), libdpkg-perl (<< 1.22.22), libeckit-dev (<= 1.20.0-1), libfclib-dev (<= 3.1.0+dfsg-2), libfltk1.3-dev (<= 1.3.8-4+b1), libghc-resolv-dev (<= 0.1.2.0-3), libghc-resolv-prof (<= 0.1.2.0-3), libglib2.0-dev (<= 2.72.3-1), libgloox-dev (<= 1.0.24-2+b1), libhesiod-dev (<= 3.2.1-3.1+b1), libinfinity-0.7-dev (<= 0.7.2-1+b1), libinsighttoolkit4-dev (<= 4.13.3withdata-dfsg2-3+b1), libinsighttoolkit5-dev (<= 5.2.1-5+b1), libismrmrd-dev (<= 1.8.0-2), libldap-dev (<= 2.5.12+dfsg-2), liblog4cplus-dev (<= 2.0.7-1), libloudmouth1-dev (<= 1.5.4-1), libmgl-dev (<= 8.0.1-2), libmimalloc2.0 (<= 2.0.6+ds-1), libminc-dev (<= 2.4.03-5), libmongoc-dev (<= 1.22.1-1), libmrpt-ros1bridge-dev (<= 1:2.4.9+ds-4+b2), libmysqlclient-dev (<= 8.0.29-1), libnetcdf-dev (<= 1:4.9.0-3), libnetcdf-mpi-dev (<= 1:4.9.0-1), libnetcdf-pnetcdf-dev (<= 1:4.9.0-1), libnfsidmap-dev (<= 1:2.6.1-2), libns3-dev (<= 3.36.1+dfsg-4), libola-dev (<= 0.10.8.nojsmin-2), libopenafs-dev (<= 1.8.8.1-3), libopendkim-dev (<= 2.11.0~beta2-7), libopendmarc-dev (<= 1.4.2-1), libopenms-dev (<= 2.6.0+cleaned1-3+b1), libopenzwave1.6-dev (<= 1.6.1914+ds-1), libpg-query-dev (<= 13-2.1.2-2), librbl-dev (<= 2.11.0~beta2-7), libre-dev (<= 1.1.0-1+b1), libshishi-dev (<= 1.0.2-11), libslurm-dev (<= 21.08.8.2-1), libsocksd0-dev (<= 1.4.2+dfsg-7+b4), libspf2-dev (<= 1.2.10-7.1+b1), libstrophe-dev (<= 0.12.1-2), libtaningia-dev (<= 0.2.2-2+b1), libtrilinos-amesos-dev (<= 13.2.0-3), libtrilinos-amesos2-dev (<= 13.2.0-3), libtrilinos-anasazi-dev (<= 13.2.0-3), libtrilinos-aztecoo-dev (<= 13.2.0-3), libtrilinos-belos-dev (<= 13.2.0-3), libtrilinos-epetra-dev (<= 13.2.0-3), libtrilinos-epetraext-dev (<= 13.2.0-3), libtrilinos-galeri-dev (<= 13.2.0-3), libtrilinos-ifpack-dev (<= 13.2.0-3), libtrilinos-ifpack2-dev (<= 13.2.0-3), libtrilinos-intrepid-dev (<= 13.2.0-3), libtrilinos-intrepid2-dev (<= 13.2.0-3), libtrilinos-isorropia-dev (<= 13.2.0-3), libtrilinos-kokkos-dev (<= 13.2.0-3), libtrilinos-kokkos-kernels-dev (<= 13.2.0-3), libtrilinos-komplex-dev (<= 13.2.0-3), libtrilinos-ml-dev (<= 13.2.0-3), libtrilinos-moertel-dev (<= 13.2.0-3), libtrilinos-muelu-dev (<= 13.2.0-3), libtrilinos-nox-dev (<= 13.2.0-3), libtrilinos-phalanx-dev (<= 13.2.0-3), libtrilinos-pike-dev (<= 13.2.0-3), libtrilinos-piro-dev (<= 13.2.0-3), libtrilinos-pliris-dev (<= 13.2.0-3), libtrilinos-rol-dev (<= 13.2.0-3), libtrilinos-rtop-dev (<= 13.2.0-3), libtrilinos-rythmos-dev (<= 13.2.0-3), libtrilinos-sacado-dev (<= 13.2.0-3), libtrilinos-shylu-dev (<= 13.2.0-3), libtrilinos-stokhos-dev (<= 13.2.0-3), libtrilinos-stratimikos-dev (<= 13.2.0-3), libtrilinos-teko-dev (<= 13.2.0-3), libtrilinos-teuchos-dev (<= 13.2.0-3), libtrilinos-thyra-dev (<= 13.2.0-3), libtrilinos-tpetra-dev (<= 13.2.0-3), libtrilinos-trilinoscouplings-dev (<= 13.2.0-3), libtrilinos-triutils-dev (<= 13.2.0-3), libtrilinos-xpetra-dev (<= 13.2.0-3), libtrilinos-zoltan2-dev (<= 13.2.0-3), libvbr-dev (<= 2.11.0~beta2-7), libvisp-dev (<= 3.5.0-2+b1), libvotca-dev (<= 2022-3), libvtk6-dev (<= 6.3.0+dfsg2-8.1+b1), libvtk7-dev (<= 7.1.1+dfsg2-10.2), open-vm-tools-dev (<= 2:12.0.5-2), pidgin-librvp (<= 0.9.7cvs-3), proftpd-dev (<= 1.3.7d+dfsg-2), slurm-wlm-basic-plugins-dev (<= 21.08.8.2-1) Conflicts: libc0.3-dev, libc6.1-dev Description: GNU C Library: Development Libraries and Header Files Contains the symlinks, headers, and object files needed to compile and link programs which use the standard C library. Homepage: https://www.gnu.org/software/libc/libc.html Package: libcap-ng0 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Håvard F. Aasen Architecture: amd64 Multi-Arch: same Source: libcap-ng (0.8.5-4) Version: 0.8.5-4+b1 Depends: libc6 (>= 2.38) Description: alternate POSIX capabilities library This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains dynamic libraries for libcap-ng. Homepage: https://people.redhat.com/sgrubb/libcap-ng Package: libcap2 Status: install ok installed Priority: optional Section: libs Installed-Size: 92 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Source: libcap2 (1:2.75-10+deb13u1) Version: 1:2.75-10+deb13u1+b1 Depends: libc6 (>= 2.38) Description: POSIX 1003.1e capabilities (library) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the shared library. Homepage: https://sites.google.com/site/fullycapable/ Package: libcap2-bin Status: install ok installed Priority: important Section: utils Installed-Size: 132 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: foreign Source: libcap2 (1:2.75-10+deb13u1) Version: 1:2.75-10+deb13u1+b1 Replaces: libcap-bin Depends: libc6 (>= 2.38), libcap2 (>= 1:2.63) Recommends: libpam-cap Breaks: libcap-bin Description: POSIX 1003.1e capabilities (utilities) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains additional utilities. Homepage: https://sites.google.com/site/fullycapable/ Package: libcbor0.10 Status: install ok installed Priority: optional Section: libs Installed-Size: 94 Maintainer: Vincent Bernat Architecture: amd64 Multi-Arch: same Source: libcbor Version: 0.10.2-2 Depends: libc6 (>= 2.14) Description: library for parsing and generating CBOR (RFC 7049) CBOR is a general-purpose schema-less binary data format, defined in RFC 7049. This package provides a C library for parsing and generating CBOR. The main features are: . - Complete RFC conformance - Robust C99 implementation - Layered architecture offers both control and convenience - Flexible memory management - No shared global state - threading friendly - Proper handling of UTF-8 - Full support for streams & incremental processing - Extensive documentation and test suite - No runtime dependencies, small footprint . This package contains the runtime library. Homepage: https://github.com/PJK/libcbor Package: libcom-err2 Status: install ok installed Priority: optional Section: libs Installed-Size: 64 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs (1.47.2-3) Version: 1.47.2-3+b11 Replaces: libcom-err2t64, libcomerr2 (<< 1.43.9-1~) Provides: libcom-err2t64 (= 1.47.2-3+b11), libcomerr2 (= 1.47.2-3+b11) Depends: libc6 (>= 2.38) Breaks: libcom-err2t64 (<< 1.47.0-2.4~exp1~), libcomerr2 (<< 1.43.9-1~) Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Homepage: http://e2fsprogs.sourceforge.net Package: libcrypt-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 345 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: libxcrypt Version: 1:4.4.38-1 Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1) Provides: libcrypt1-dev Depends: libcrypt1 (= 1:4.4.38-1) Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1) Conflicts: libcrypt1-dev, libcrypt2-dev Description: libcrypt development files This package contains the files needed for developing applications that use libcrypt. Package: libcrypt1 Status: install ok installed Priority: optional Section: libs Installed-Size: 234 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: libxcrypt Version: 1:4.4.38-1 Replaces: libc6 (<< 2.29-4) Depends: libc6 (>= 2.38) Conflicts: libpam0g (<< 1.4.0-10) Description: libcrypt shared library libxcrypt is a modern library for one-way hashing of passwords. It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and bcrypt-based password hashes It provides the traditional Unix 'crypt' and 'crypt_r' interfaces, as well as a set of extended interfaces like 'crypt_gensalt'. Package: libcups2t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 700 Maintainer: Debian Printing Team Architecture: amd64 Multi-Arch: same Source: cups Version: 2.4.10-3+deb13u2 Replaces: libcups2 Provides: libcups2 (= 2.4.10-3+deb13u2) Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.38), libgnutls30t64 (>= 3.8.1), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0) Suggests: cups-common Breaks: libcups2 (<< 2.4.10-3+deb13u2) Description: Common UNIX Printing System(tm) - Core library The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the base shared libraries for CUPS. Homepage: https://github.com/OpenPrinting/cups/ Package: libcurl3t64-gnutls Status: install ok installed Priority: optional Section: libs Installed-Size: 993 Maintainer: Debian Curl Maintainers Architecture: amd64 Multi-Arch: same Source: curl Version: 8.14.1-2+deb13u3 Replaces: libcurl3-gnutls Provides: libcurl3-gnutls (= 8.14.1-2+deb13u3) Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgnutls30t64 (>= 3.8.6), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnettle8t64, libnghttp2-14 (>= 1.50.0), libnghttp3-9 (>= 0.15.0), libngtcp2-16 (>= 1.1.0), libngtcp2-crypto-gnutls8 (>= 1.1.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1t64 (>= 1.11.1), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.4) Recommends: ca-certificates Breaks: libcurl3-gnutls (<< 8.14.1-2+deb13u3) Description: easy-to-use client-side URL transfer library (GnuTLS flavour) libcurl is an easy-to-use client-side URL transfer library, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling and more! . libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported, fast, thoroughly documented and is already used by many known, big and successful companies and numerous applications. . SSL support is provided by GnuTLS. Homepage: https://curl.se/ Package: libcurl4t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 1013 Maintainer: Debian Curl Maintainers Architecture: amd64 Multi-Arch: same Source: curl Version: 8.14.1-2+deb13u3 Replaces: libcurl3, libcurl4 Provides: libcurl4 (= 8.14.1-2+deb13u3) Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnghttp2-14 (>= 1.50.0), libnghttp3-9 (>= 0.15.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1t64 (>= 1.11.1), libssl3t64 (>= 3.3.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.4) Recommends: ca-certificates Breaks: libcurl4 (<< 8.14.1-2+deb13u3) Conflicts: libcurl3 Description: easy-to-use client-side URL transfer library (OpenSSL flavour) libcurl is an easy-to-use client-side URL transfer library, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling and more! . libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported, fast, thoroughly documented and is already used by many known, big and successful companies and numerous applications. . SSL support is provided by OpenSSL. Homepage: https://curl.se/ Package: libdav1d7 Status: install ok installed Priority: optional Section: libs Installed-Size: 1730 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: dav1d Version: 1.5.1-1 Depends: libc6 (>= 2.34) Description: fast and small AV1 video stream decoder (shared library) dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed and correctness. . dav1d supports the following features: * support for all features of the AV1 bitstream * support for all bitdepth, 8, 10 and 12bits * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale * full acceleration for AVX-2 chips * full acceleration for SSSE3+ chips * full acceleration for ARMv8 chips * partial acceleration for ARMv7 chips . This package provides the shared library. Homepage: https://www.videolan.org/projects/dav1d.html Package: libdb5.3t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 1854 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: db5.3 Version: 5.3.28+dfsg2-9 Replaces: libdb5.3 Provides: libdb5.3 (= 5.3.28+dfsg2-9) Depends: libc6 (>= 2.38) Breaks: libdb5.3 (<< 5.3.28+dfsg2-9) Description: Berkeley v5.3 Database Libraries [runtime] This is the runtime package for programs that use the v5.3 Berkeley database library. Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html Package: libdbus-1-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 445 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: dbus Version: 1.16.2-2 Depends: libc6 (>= 2.38), libsystemd0 Recommends: dbus Description: simple interprocess messaging system (library) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . The message bus daemon can be found in the dbus-daemon package. Homepage: https://dbus.freedesktop.org/ Package: libde265-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 487 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libde265 (1.0.15-1) Version: 1.0.15-1+b3 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1) Description: Open H.265 video codec implementation libde265 is an open source implementation of the H.265 video codec. It is written from scratch in plain C for simplicity and efficiency. Its simple API makes it easy to integrate it into other software. Homepage: https://github.com/strukturag/libde265 Package: libdebconfclient0 Status: install ok installed Priority: optional Section: libs Installed-Size: 38 Maintainer: Debian Install System Team Architecture: amd64 Multi-Arch: same Source: cdebconf Version: 0.280 Depends: libc6 (>= 2.38) Description: Debian Configuration Management System (C-implementation library) Debconf is a configuration management system for Debian packages. It is used by some packages to prompt you for information before they are installed. cdebconf is a reimplementation of the original debconf in C. . This library allows C programs to interface with cdebconf. Package: libdeflate0 Status: install ok installed Priority: optional Section: libs Installed-Size: 102 Maintainer: Deflate Team Architecture: amd64 Multi-Arch: same Source: libdeflate Version: 1.23-2 Depends: libc6 (>= 2.14) Description: fast, whole-buffer DEFLATE-based compression and decompression The supported formats are: * DEFLATE (raw) * zlib (a.k.a. DEFLATE with a zlib wrapper) * gzip (a.k.a. DEFLATE with a gzip wrapper) . libdeflate is heavily optimized. It is significantly faster than the zlib library, both for compression and decompression, and especially on x86 processors. In addition, libdeflate provides optional high compression modes that provide a better compression ratio than the zlib's "level 9". Homepage: https://github.com/ebiggers/libdeflate Package: libdpkg-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 2091 Maintainer: Dpkg Developers Architecture: all Multi-Arch: foreign Source: dpkg Version: 1.22.22 Depends: perl:any, dpkg (>= 1.18.11) Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils (>= 5.4.0) Suggests: debian-keyring, debian-tag2upload-keyring, sq | sqop | rsop | gosop | pgpainless-cli | gpg-sq | gnupg, sqv | sqopv | rsopv | sopv | gosop | pgpainless-cli | gpgv-sq | gpgv, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr Breaks: dgit (<< 3.13~), gosop (<< 1.1.0~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), pkg-kde-tools (<< 0.15.28~), rsop (<< 0.4.0~), sq (<< 0.40.0~), sqop (<< 0.27.2~), sqv (<< 1.3.0~) Description: Dpkg perl modules This package provides the perl modules used by the scripts in dpkg-dev. They cover a wide range of functionality. Among them there are the following public modules: . - Dpkg: core variables - Dpkg::Arch: architecture handling functions - Dpkg::BuildFlags: set, modify and query compilation build flags - Dpkg::BuildInfo: build information functions - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS - Dpkg::BuildProfiles: parse and manipulate build profiles - Dpkg::Changelog: parse changelogs - Dpkg::Changelog::Entry: represents a changelog entry - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog - Dpkg::Checksums: generate and parse checksums - Dpkg::Compression: simple database of available compression methods - Dpkg::Compression::FileHandle: transparently (de)compress files - Dpkg::Compression::Process: wrapper around compression tools - Dpkg::Conf: parse dpkg configuration files - Dpkg::Control: parse and manipulate Debian control information (.dsc, .changes, Packages/Sources entries, etc.) - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog - Dpkg::Control::Fields: manage (list of known) control fields - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields - Dpkg::Control::Info: parse files like debian/control - Dpkg::Control::Tests: parse files like debian/tests/control - Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza - Dpkg::Deps: parse and manipulate dependencies - Dpkg::Deps::Simple: represents a single dependency statement - Dpkg::Deps::Multiple: base module to represent multiple dependencies - Dpkg::Deps::Union: list of unrelated dependencies - Dpkg::Deps::AND: list of AND dependencies - Dpkg::Deps::OR: list of OR dependencies - Dpkg::Deps::KnownFacts: list of installed and virtual packages - Dpkg::Exit: push, pop and run exit handlers - Dpkg::Gettext: wrapper around Locale::gettext - Dpkg::IPC: spawn sub-processes and feed/retrieve data - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for example) - Dpkg::Interface::Storable: base object serializer - Dpkg::Path: common path handling functions - Dpkg::Source::Format: manipulate debian/source/format files - Dpkg::Source::Package: extract Debian source packages - Dpkg::Substvars: substitute variables in strings - Dpkg::Vendor: identify current distribution vendor - Dpkg::Version: parse and manipulate Debian package versions . All the packages listed in Suggests or Recommends are used by some of the modules. Homepage: https://wiki.debian.org/Teams/Dpkg Package: libedit2 Status: install ok installed Priority: optional Section: libs Installed-Size: 262 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: libedit Version: 3.1-20250104-1 Replaces: libedit-dev (<< 3.1-20180525-2~) Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.38), libtinfo6 (>= 6) Description: BSD editline and history libraries Command line editor library provides generic line editing, history, and tokenization functions. . It slightly resembles GNU readline. Homepage: https://www.thrysoee.dk/editline/ Package: libelf1t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 1228 Maintainer: Debian Elfutils Maintainers Architecture: amd64 Multi-Arch: same Source: elfutils Version: 0.192-4 Replaces: libelf1 Provides: libelf1 (= 0.192-4) Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4) Breaks: libelf1 (<< 0.192-4) Description: library to read and write ELF files The libelf1t64 package provides a shared library which allows reading and writing ELF files on a high level. Third party programs depend on this package to read internals of ELF files. The programs of the elfutils package use it also to generate new ELF files. . This library is part of elfutils. Homepage: https://sourceware.org/elfutils/ Package: liberror-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 71 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 0.17030-1 Depends: perl:any Description: Perl module for error/exception handling in an OO-ish way The Error module provides two interfaces. Firstly "Error" provides a procedural interface to exception handling. Secondly "Error" is a base class for errors/exceptions that can either be thrown, for subsequent catch, or can simply be recorded. . Errors in the class "Error" should not be thrown directly, but the user should throw errors from a sub-class of "Error". . Warning: Using the "Error" module is no longer recommended due to the black-magical nature of its syntactic sugar, which often tends to break. Its maintainers have stopped actively writing code that uses it, and discourage people from doing so. . Recommended alternatives are Exception::Class (libexception-class-perl), Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny (libtry-tiny-perl). Homepage: https://metacpan.org/release/Error Package: libevent-core-2.1-7t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 306 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: libevent (2.1.12-stable-10) Version: 2.1.12-stable-10+b1 Replaces: libevent-core-2.1-7 Provides: libevent-core-2.1-7 (= 2.1.12-stable-10+b1) Depends: libc6 (>= 2.38) Breaks: libevent-core-2.1-7 (<< 2.1.12-stable-10) Description: Asynchronous event notification library (core) Libevent is an asynchronous event notification library that provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . It is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . The libevent_core library includes event loops, timers, buffer code, and various small compatibility functions. . If you're writing software that only uses libevent's event loop, you should link against only the libevent_core library. Homepage: https://libevent.org/ Package: libexpat1 Status: install ok installed Priority: optional Section: libs Installed-Size: 400 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: expat Version: 2.7.1-2 Pre-Depends: libc6 (>= 2.38) Description: XML parsing C library - runtime library This package contains the runtime, shared library of expat, the C library for parsing XML. Expat is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). Homepage: https://libexpat.github.io/ Package: libfcgi-bin Status: install ok installed Priority: optional Section: utils Installed-Size: 41 Maintainer: Boris Pek Architecture: amd64 Multi-Arch: foreign Source: libfcgi Version: 2.4.5-0.1 Replaces: libfcgi0t64 (<< 2.4.0-8.4) Depends: libc6 (>= 2.34), libfcgi0t64 (>= 2.4.5) Breaks: libfcgi0t64 (<< 2.4.0-8.4) Description: FastCGI bridge from CGI FastCGI is a language independent, scalable, open extension to CGI that provides high performance without the limitations of server specific APIs. . This package contains the cgi-fcgi utility to bridge between CGI and FastCGI. Homepage: https://github.com/FastCGI-Archives Package: libfcgi0t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 92 Maintainer: Boris Pek Architecture: amd64 Multi-Arch: same Source: libfcgi Version: 2.4.5-0.1 Replaces: libfcgi0, libfcgi0c2, libfcgi0ldbl Provides: libfcgi, libfcgi0ldbl (= 2.4.5-0.1) Depends: libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1) Recommends: libfcgi-bin (= 2.4.5-0.1) Breaks: libfcgi0ldbl (<< 2.4.5-0.1) Conflicts: libfcgi0, libfcgi0c2 Description: shared library of FastCGI FastCGI is a language independent, scalable, open extension to CGI that provides high performance without the limitations of server specific APIs. . This package contains the shared libraries. Homepage: https://github.com/FastCGI-Archives Package: libffi8 Status: install ok installed Priority: optional Section: libs Installed-Size: 72 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: libffi Version: 3.4.8-2 Replaces: libffi8ubuntu1 (<< 3.4.2-1) Provides: libffi8ubuntu1 (= 3.4.8-2) Depends: libc6 (>= 2.34) Breaks: libffi8ubuntu1 (<< 3.4.2-1) Description: Foreign Function Interface library runtime A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language. Homepage: https://sourceware.org/libffi/ Package: libfftw3-double3 Status: install ok installed Priority: optional Section: libs Installed-Size: 2304 Maintainer: Debian Science Maintainers Architecture: amd64 Multi-Arch: same Source: fftw3 (3.3.10-2) Version: 3.3.10-2+b1 Depends: libc6 (>= 2.34), libgomp1 (>= 4.9) Suggests: libfftw3-bin, libfftw3-dev Description: Library for computing Fast Fourier Transforms - Double precision The FFTW library computes Fast Fourier Transforms (FFT) in one or more dimensions. It is extremely fast. This package contains the shared library for double precision transforms. . To get the static library and the header files, you need to install libfftw3-dev. For documentation, see libfftw3-doc. Homepage: https://fftw.org Package: libfido2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 250 Maintainer: Debian Authentication Maintainers Architecture: amd64 Multi-Arch: same Source: libfido2 (1.15.0-1) Version: 1.15.0-1+b1 Depends: libc6 (>= 2.38), libcbor0.10 (>= 0.10.2), libssl3t64 (>= 3.0.0), libudev1 (>= 183), zlib1g (>= 1:1.1.4) Description: library for generating and verifying FIDO 2.0 objects A library for communicating with a FIDO device over USB or NFC, and for verifying attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2) are supported. . This package contains the library. Homepage: https://developers.yubico.com/libfido2/ Package: libfile-fnmatch-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 43 Maintainer: Debian Perl Group Architecture: amd64 Source: libfile-fnmatch-perl (0.02-3) Version: 0.02-3+b4 Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4) Description: Perl module that provides simple filename and pathname matching File::FnMatch::fnmatch() provides simple, shell-like pattern matching. . Though considerably less powerful than regular expressions, shell patterns are nonetheless useful and familiar to a large audience of end-users. Homepage: https://metacpan.org/release/File-FnMatch Package: libfontconfig1 Status: install ok installed Priority: optional Section: libs Installed-Size: 592 Maintainer: Debian freedesktop.org maintainers Architecture: amd64 Multi-Arch: same Source: fontconfig Version: 2.15.0-2.3 Provides: libfontconfig Depends: libc6 (>= 2.38), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), fontconfig-config (>= 2.15.0-2.3) Breaks: xpdf (<= 3.03-11) Description: generic font configuration library - runtime Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the runtime library needed to launch applications using fontconfig. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: libfontenc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libfontenc (1:1.1.8-1) Version: 1:1.1.8-1+b2 Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4) Description: X11 font encoding library libfontenc is a library which helps font libraries portably determine and deal with different encodings of fonts. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libfontenc Package: libfreetype6 Status: install ok installed Priority: optional Section: libs Installed-Size: 963 Maintainer: Hugh McMaster Architecture: amd64 Multi-Arch: same Source: freetype Version: 2.13.3+dfsg-1+deb13u1 Depends: libbrotli1 (>= 0.6.0), libbz2-1.0, libc6 (>= 2.33), libpng16-16t64 (>= 1.6.46), zlib1g (>= 1:1.1.4) Description: FreeType 2 font engine, shared library files The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on providing small, efficient and ubiquitous products. . The FreeType 2 library is their new software font engine. It has been designed to provide the following important features: * A universal and simple API to manage font files * Support for several font formats through loadable modules * High-quality anti-aliasing * High portability & performance . Supported font formats include: * TrueType files (.ttf) and collections (.ttc) * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format * Type 1 Multiple Master fonts. The FreeType 2 API also provides routines to manage design instances easily * Type 1 CID-keyed fonts * OpenType/CFF (.otf) fonts * CFF/Type 2 fonts * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with the Adobe SVG viewer plugin. * Windows FNT/FON bitmap fonts . This package contains the files needed to run programs that use the FreeType 2 library. Homepage: https://freetype.org Package: libgav1-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 1154 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libgav1 (0.19.0-3) Version: 0.19.0-3+b1 Depends: libabsl20240722 (>= 20240722.0-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 12) Description: AV1 decoder developed by Google -- runtime library This package contains the runtime, shared library of gav1. Gav1 is a new decoder implementation for AV1 video encoding format (supporting profiles 0 and 1). Homepage: https://chromium.googlesource.com/codecs/libgav1/ Package: libgcc-s1 Protected: yes Status: install ok installed Priority: optional Section: libs Installed-Size: 197 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-14 Version: 14.2.0-19 Replaces: libgcc1 (<< 1:10) Provides: libgcc1 (= 1:14.2.0-19) Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.35) Description: GCC support library Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Homepage: http://gcc.gnu.org/ Important: yes Package: libgcrypt20 Status: install ok installed Priority: optional Section: libs Installed-Size: 1999 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Version: 1.11.0-7 Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.50) Suggests: rng-tools Description: LGPL Crypto library - runtime library libgcrypt contains cryptographic functions. Many important free ciphers, hash algorithms and public key signing algorithms have been implemented: . Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED, Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5, RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.) Homepage: https://gnupg.org/software/libgcrypt/ Package: libgdbm-compat4t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 75 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: gdbm Version: 1.24-2 Replaces: libgdbm-compat4 Provides: libgdbm-compat4 (= 1.24-2) Depends: libc6 (>= 2.33), libgdbm6t64 (>= 1.16) Breaks: libgdbm-compat4 (<< 1.24-2) Description: GNU dbm database routines (legacy support runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). This package includes library files, required to run old programs, that use legacy 'dbm' interface. For new programs, please use modern interface, provided by libgdbm6t64 and libgdbm-dev. Homepage: https://gnu.org/software/gdbm Package: libgdbm6t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 138 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: gdbm Version: 1.24-2 Replaces: libgdbm6 Provides: libgdbm6 (= 1.24-2) Depends: libc6 (>= 2.34) Suggests: gdbm-l10n (= 1.24-2) Breaks: libgdbm6 (<< 1.24-2) Description: GNU dbm database routines (runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). Homepage: https://gnu.org/software/gdbm Package: libglib2.0-0t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 4448 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: glib2.0 Version: 2.84.4-3~deb13u3 Replaces: libglib2.0-0 (<< 2.80.0-7~) Provides: libgio-2.0-0 (= 2.84.4-3~deb13u3), libglib-2.0-0 (= 2.84.4-3~deb13u3), libglib2.0-0 (= 2.84.4-3~deb13u3), libgmodule-2.0-0 (= 2.84.4-3~deb13u3), libgobject-2.0-0 (= 2.84.4-3~deb13u3), libgthread-2.0-0 (= 2.84.4-3~deb13u3) Depends: libatomic1 (>= 4.8), libc6 (>= 2.38), libffi8 (>= 3.4), libmount1 (>= 2.40~rc2), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2) Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs Suggests: low-memory-monitor Breaks: glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), gnome-shell (<< 44.9-2~), libedataserver-1.2-26 (<< 3.44.3-2~), libgladeui-2-6 (<< 3.22.2), libglib2.0-0 (<< 2.80.0-7~), libsoup2.4-tests (<< 2.72.0-3~) Description: GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Homepage: https://gitlab.gnome.org/GNOME/glib Package: libgmp10 Status: install ok installed Priority: optional Section: libs Installed-Size: 882 Maintainer: Debian Science Maintainers Architecture: amd64 Multi-Arch: same Source: gmp Version: 2:6.3.0+dfsg-3 Depends: libc6 (>= 2.38) Breaks: postgresql-pgmp (<< 1.0.3-1) Description: Multiprecision arithmetic library GNU MP is a programmer's library for arbitrary precision arithmetic (ie, a bignum package). It can operate on signed integer, rational, and floating point numeric types. . It has a rich set of functions, and the functions have a regular interface. Homepage: https://gmplib.org/ Package: libgnutls30t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 3504 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: gnutls28 Version: 3.8.9-3+deb13u4 Replaces: libgnutls30 Provides: libgnutls30 (= 3.8.9-3+deb13u4) Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64 (>= 3.10), libidn2-0 (>= 2.0.0), libnettle8t64 (>= 3.10), libp11-kit0 (>= 0.25.1), libtasn1-6 (>= 4.14), libunistring5 (>= 1.1) Suggests: gnutls-bin Breaks: libgnutls30 (<< 3.8.9-3+deb13u4) Description: GNU TLS library - main runtime library GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - certificate path validation, as well as DANE and trust on first use. - the Online Certificate Status Protocol (OCSP). - public key methods, including RSA and Elliptic curves, as well as password and key authentication methods such as SRP and PSK protocols. - all the strong encryption algorithms, including AES and Camellia. - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets. - HSMs and cryptographic tokens, via PKCS #11. . This package contains the main runtime library. Homepage: https://www.gnutls.org/ Package: libgomp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 368 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-14 Version: 14.2.0-19 Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Description: GCC OpenMP (GOMP) support library GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Homepage: http://gcc.gnu.org/ Package: libgpg-error0 Status: install ok installed Priority: optional Section: libs Installed-Size: 208 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: same Source: libgpg-error Version: 1.51-4 Depends: libc6 (>= 2.38) Recommends: libgpg-error-l10n Description: GnuPG development runtime library Library that defines common error values, messages, and common runtime functionality for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and possibly more in the future. . It will likely be renamed "gpgrt" in the future. Homepage: https://www.gnupg.org/related_software/libgpg-error/ Package: libgpm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 45 Maintainer: Axel Beckert Architecture: amd64 Multi-Arch: same Source: gpm (1.20.7-11) Version: 1.20.7-11+b2 Depends: libc6 (>= 2.38) Suggests: gpm Description: General Purpose Mouse - shared library This package provides a library that handles mouse requests and delivers them to applications. See the description for the 'gpm' package for more information. Homepage: https://nico.schottelius.org/software/gpm/ Package: libgs-common Status: install ok installed Priority: optional Section: libs Installed-Size: 316 Maintainer: Debian Printing Team Architecture: all Multi-Arch: foreign Source: ghostscript Version: 10.05.1~dfsg-1+deb13u1 Replaces: libgs9-common (<< 10) Breaks: libgs9-common (<< 10) Description: interpreter for the PostScript language and for PDF - ICC profiles GPL Ghostscript is used for PostScript/PDF preview and printing. Usually as a back-end to a program such as ghostview, it can display PostScript and PDF documents in an X11 environment. . This package provides common ICC profiles. Homepage: https://www.ghostscript.com/ Package: libgs10 Status: install ok installed Priority: optional Section: libs Installed-Size: 22216 Maintainer: Debian Printing Team Architecture: amd64 Multi-Arch: same Source: ghostscript Version: 10.05.1~dfsg-1+deb13u1 Depends: libgs10-common (= 10.05.1~dfsg-1+deb13u1), poppler-data, libc6 (>= 2.38), libcups2t64 (>= 2.3~b6), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libidn12 (>= 1.13), libijs-0.35 (>= 0.35), libjbig2dec0 (>= 0.16+20190905), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), libopenjp2-7 (>= 2.0.0), libpaper2 (>= 2.2.5), libpng16-16t64 (>= 1.6.46), libtiff6 (>= 4.0.3), libx11-6, libxt6t64, zlib1g (>= 1:1.2.0) Description: interpreter for the PostScript language and for PDF - Library GPL Ghostscript is used for PostScript/PDF preview and printing. Usually as a back-end to a program such as ghostview, it can display PostScript and PDF documents in an X11 environment. . This package provides the Ghostscript library which makes the facilities of GPL Ghostscript available to applications. Homepage: https://www.ghostscript.com/ Package: libgs10-common Status: install ok installed Priority: optional Section: libs Installed-Size: 2265 Maintainer: Debian Printing Team Architecture: all Multi-Arch: foreign Source: ghostscript Version: 10.05.1~dfsg-1+deb13u1 Replaces: libgs-common (<< 10.0.0~dfsg-5) Depends: fonts-urw-base35 (>= 20200910), libgs-common Recommends: fonts-droid-fallback Breaks: libgs-common (<< 10.0.0~dfsg-5) Description: interpreter for the PostScript language and for PDF - common files GPL Ghostscript is used for PostScript/PDF preview and printing. Usually as a back-end to a program such as ghostview, it can display PostScript and PDF documents in an X11 environment. . This package provides common architecture-independent files needed by the GPL Ghostscript library. . By default, GPL Ghostscript uses a font from the fonts-droid package to approximate glyphs in PDFs for which the requested CJK TrueType font is missing. If the fonts-droid package is not installed, these glyphs will be rendered as bullets. Homepage: https://www.ghostscript.com/ Package: libgssapi-krb5-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 434 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.21.3-5 Depends: libkrb5-3 (= 1.21.3-5), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkrb5support0 (= 1.21.3-5) Suggests: krb5-doc, krb5-user Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the MIT Kerberos implementation of GSS-API used by applications and Kerberos clients. Homepage: https://web.mit.edu/kerberos/ Package: libheif-plugin-aomenc Status: install ok installed Priority: optional Section: libs Installed-Size: 72 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libheif Version: 1.19.8-1 Depends: libheif1 (= 1.19.8-1), libaom3 (>= 3.2.0), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 13) Description: HEIF and AVIF file format decoder and encoder - aomenc plugin libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022 (2nd Edition) capabilities. . HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image coding, respectively, for the best compression ratios currently possible. . libheif supports various codecs provided by plugins for image decoding and encoding. . This package contains the aomenc plugin that uses libaom to encode AV1 images. . libaom: https://aomedia.org/ Homepage: http://www.libheif.org Package: libheif-plugin-dav1d Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libheif Version: 1.19.8-1 Depends: libheif1 (= 1.19.8-1), libc6 (>= 2.14), libdav1d7 (>= 0.1.0), libstdc++6 (>= 5) Description: HEIF and AVIF file format decoder and encoder - dav1d plugin libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022 (2nd Edition) capabilities. . HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image coding, respectively, for the best compression ratios currently possible. . libheif supports various codecs provided by plugins for image decoding and encoding. . This package contains the dav1d plugin that uses dav1d to decode AV1 images. . dav1d: https://www.videolan.org/projects/dav1d.html Homepage: http://www.libheif.org Package: libheif-plugin-libde265 Status: install ok installed Priority: optional Section: libs Installed-Size: 52 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libheif Version: 1.19.8-1 Depends: libheif1 (= 1.19.8-1), libc6 (>= 2.14), libde265-0 (>= 1.0.7), libgcc-s1 (>= 3.0), libstdc++6 (>= 13) Description: HEIF and AVIF file format decoder and encoder - libde265 plugin libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022 (2nd Edition) capabilities. . HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image coding, respectively, for the best compression ratios currently possible. . libheif supports various codecs provided by plugins for image decoding and encoding. . This package contains the libde265 plugin that uses libde265 to decode HEVC images. . libde265: https://www.libde265.org/ Homepage: http://www.libheif.org Package: libheif-plugin-x265 Status: install ok installed Priority: optional Section: libs Installed-Size: 68 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libheif Version: 1.19.8-1 Depends: libheif1 (= 1.19.8-1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 13), libx265-215 (>= 4.1) Description: HEIF and AVIF file format decoder and encoder - x265 plugin libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022 (2nd Edition) capabilities. . HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image coding, respectively, for the best compression ratios currently possible. . libheif supports various codecs provided by plugins for image decoding and encoding. . This package contains the x265 plugin that uses x265 to encode HEVC images. . x265: https://www.videolan.org/developers/x265.html Homepage: http://www.libheif.org Package: libheif1 Status: install ok installed Priority: optional Section: libs Installed-Size: 1663 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libheif Version: 1.19.8-1 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libsharpyuv0 (>= 1.5.0), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4), libheif-plugin-dav1d (= 1.19.8-1) | libheif-plugin-aomdec (= 1.19.8-1), libheif-plugin-libde265 (= 1.19.8-1) Recommends: libheif-plugin-x265 (= 1.19.8-1), libheif-plugin-aomenc (= 1.19.8-1) Suggests: libheif-plugin-ffmpegdec (= 1.19.8-1), libheif-plugin-jpegdec (= 1.19.8-1), libheif-plugin-jpegenc (= 1.19.8-1), libheif-plugin-j2kdec (= 1.19.8-1), libheif-plugin-j2kenc (= 1.19.8-1), libheif-plugin-kvazaar (= 1.19.8-1), libheif-plugin-rav1e (= 1.19.8-1), libheif-plugin-svtenc (= 1.19.8-1) Description: HEIF and AVIF file format decoder and encoder - shared library libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022 (2nd Edition) capabilities. . HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image coding, respectively, for the best compression ratios currently possible. . libheif supports various codecs provided by plugins for image decoding and encoding. . This package contains the shared library. Homepage: http://www.libheif.org Package: libhogweed6t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 483 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 3.10.1-1 Replaces: libhogweed6 Provides: libhogweed6 (= 3.10.1-1) Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg), libnettle8t64 Breaks: libhogweed6 (<< 3.10.1-1) Description: low level cryptographic library (public-key cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the asymmetric cryptographic algorithms, which, require the GNU multiple precision arithmetic library (libgmp) for their large integer computations. Homepage: https://www.lysator.liu.se/~nisse/nettle/ Package: libice6 Status: install ok installed Priority: optional Section: libs Installed-Size: 142 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libice Version: 2:1.1.1-1 Depends: libc6 (>= 2.38), x11-common Description: X11 Inter-Client Exchange library This package provides the main interface to the X11 Inter-Client Exchange library, which allows for communication of data between X clients. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libICE Package: libicu76 Status: install ok installed Priority: optional Section: libs Installed-Size: 37371 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: icu Version: 76.1-4 Replaces: libiculx63 (<< 63.1-5) Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 14) Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~) Description: International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains the runtime libraries for ICU. Homepage: https://icu.unicode.org/ Package: libidn12 Status: install ok installed Priority: optional Section: libs Installed-Size: 233 Maintainer: Debian Libidn Team Architecture: amd64 Multi-Arch: same Source: libidn Version: 1.43-1 Depends: libc6 (>= 2.14) Description: GNU Libidn library, implementation of IETF IDN specifications GNU Libidn is a fully documented implementation of the Stringprep, Punycode and IDNA specifications. Libidn's purpose is to encode and decode internationalized domain names. The Nameprep, XMPP, SASLprep, and iSCSI profiles are supported. . This package contains the shared library. Homepage: https://www.gnu.org/software/libidn/ Package: libidn2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 446 Maintainer: Debian Libidn team Architecture: amd64 Multi-Arch: same Source: libidn2 Version: 2.3.8-2 Depends: libc6 (>= 2.14), libunistring5 (>= 1.1) Description: Internationalized domain names (IDNA2008/TR46) library Libidn2 implements the revised algorithm for internationalized domain names called IDNA2008/TR46. . This package contains runtime libraries. Homepage: https://www.gnu.org/software/libidn/#libidn2 Package: libijs-0.35 Status: install ok installed Priority: optional Section: libs Installed-Size: 48 Maintainer: Debian Printing Team Architecture: amd64 Multi-Arch: same Source: ijs Version: 0.35-15.2 Depends: libc6 (>= 2.14) Description: IJS raster image transport protocol: shared library IJS is, first and foremost, a protocol for transmission of raster page images. This snapshot provides a reference implementation of the protocol, the design of which is still in flux. When the protocol specification is published, it will be authoritative. Applications should feel free to link against the library provided in this package, adapt that code for their own needs, or roll a completely new implementation. . IJS is a client-server protocol, used to write ghostscript drivers. The drivers are separate programs. The client and server communicate via pipes, though shared memory may be used additionally in the future. Currently IJS is used by the hpijs and ijsgimpprint drivers. . Code for both the client- and server-side is included in the library. This package provides the shared library. Homepage: http://www.linuxprinting.org/ijs/ Package: libjbig0 Status: install ok installed Priority: optional Section: libs Installed-Size: 85 Maintainer: Michael van der Kolff Architecture: amd64 Multi-Arch: same Source: jbigkit (2.1-6.1) Version: 2.1-6.1+b2 Depends: libc6 (>= 2.4) Description: JBIGkit libraries JBIG-KIT provides a portable library of compression and decompression functions with a documented interface that you can include very easily into your image or document processing software. . This package contains the dynamically linked library. Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/ Package: libjbig2dec0 Status: install ok installed Priority: optional Section: libs Installed-Size: 181 Maintainer: Debian Printing Team Architecture: amd64 Multi-Arch: same Source: jbig2dec (0.20-1) Version: 0.20-1+b3 Depends: libc6 (>= 2.14) Description: JBIG2 decoder library - shared libraries jbig2dec is a decoder library and example utility implementing the JBIG2 bi-level image compression spec. Also known as ITU T.88 and ISO IEC 14492, and included by reference in Adobe's PDF version 1.4 and later. . This package contains the shared library libjbig2dec. Homepage: https://jbig2dec.com/ Package: libjemalloc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 876 Maintainer: Faidon Liambotis Architecture: amd64 Multi-Arch: same Source: jemalloc Version: 5.3.0-3 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4) Description: general-purpose scalable concurrent malloc(3) implementation A library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. . Notable features are reduced lock contention, predictable low fragmentation, and introspection with heap profiling. Homepage: https://jemalloc.net/ Package: libjpeg62-turbo Status: install ok installed Priority: optional Section: libs Installed-Size: 694 Maintainer: Ondřej Surý Architecture: amd64 Multi-Arch: same Source: libjpeg-turbo Version: 1:2.1.5-4 Replaces: libjpeg62 Provides: libjpeg62 (= 1:2.1.5-4) Depends: libc6 (>= 2.14) Conflicts: libjpeg62 Description: libjpeg-turbo JPEG runtime library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the shared runtime library. Homepage: https://www.libjpeg-turbo.org/ Package: libjq1 Status: install ok installed Priority: optional Section: utils Installed-Size: 434 Maintainer: ChangZhuo Chen (陳昌倬) Architecture: amd64 Multi-Arch: same Source: jq Version: 1.7.1-6+deb13u2 Depends: libc6 (>= 2.39), libonig5 (>= 6.8.1) Description: lightweight and flexible command-line JSON processor - shared library jq is like sed for JSON data – you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text. . It is written in portable C, and it has minimal runtime dependencies. . jq can mangle the data format that you have into the one that you want with very little effort, and the program to do so is often shorter and simpler than you’d expect. . This package contains the shared library. Homepage: https://jqlang.github.io/jq Package: libk5crypto3 Status: install ok installed Priority: optional Section: libs Installed-Size: 266 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.21.3-5 Depends: libc6 (>= 2.38), libkrb5support0 (= 1.21.3-5) Suggests: krb5-doc, krb5-user Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~) Description: MIT Kerberos runtime libraries - Crypto Library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime cryptography libraries used by applications and Kerberos clients. Homepage: https://web.mit.edu/kerberos/ Package: libkeyutils1 Status: install ok installed Priority: optional Section: libs Installed-Size: 41 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Source: keyutils Version: 1.6.3-6 Depends: libc6 (>= 2.14) Description: Linux Key Management Utilities (library) Keyutils is a set of utilities for managing the key retention facility in the kernel, which can be used by filesystems, block devices and more to gain and retain the authorization and encryption keys required to perform secure operations. . This package provides a wrapper library for the key management facility system calls. Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git Package: libkrb5-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1074 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.21.3-5 Depends: libkrb5support0 (= 1.21.3-5), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkeyutils1 (>= 1.5.9), libssl3t64 (>= 3.0.0) Recommends: krb5-locales Suggests: krb5-doc, krb5-user Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4) Description: MIT Kerberos runtime libraries Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the main Kerberos v5 API used by applications and Kerberos clients. Homepage: https://web.mit.edu/kerberos/ Package: libkrb5support0 Status: install ok installed Priority: optional Section: libs Installed-Size: 137 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.21.3-5 Depends: libc6 (>= 2.38) Breaks: krb5-admin-server (<< 1.20.1-4~), krb5-kdc (<< 1.20.1-4~), krb5-pkinit (<< 1.20.1-4~), krb5-user (<< 1.20.1-4~), libgssapi-krb5-2 (<< 1.20), libk5crypto3 (<< 1.20.1-4~), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit12 (<< 1.20.1-4~), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-10t64 (<< 1.20.1-4~), libkdb5-8 (<< 1.16), libkrb5-3 (<< 1.20.1-4~) Description: MIT Kerberos runtime libraries - Support library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains an internal runtime support library used by other Kerberos libraries. Homepage: https://web.mit.edu/kerberos/ Package: libksba8 Status: install ok installed Priority: optional Section: libs Installed-Size: 330 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: libksba (1.6.7-2) Version: 1.6.7-2+b1 Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.46) Description: X.509 and CMS support library KSBA (pronounced Kasbah) is a library to make X.509 certificates as well as the CMS easily accessible by other applications. Both specifications are building blocks of S/MIME and TLS. . KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER Encoder, Certificate Handling and CMS Handling. . This package contains the runtime library files. Homepage: https://www.gnupg.org/related_software/libksba/ Package: liblastlog2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 75 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.41-5 Depends: libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9) Description: lastlog2 database shared library Y2038 safe lastlog database implementation, library files. Homepage: https://github.com/util-linux/util-linux Package: liblcms2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 454 Maintainer: Thomas Weber Architecture: amd64 Multi-Arch: same Source: lcms2 Version: 2.16-2+deb13u2 Depends: libc6 (>= 2.29) Suggests: liblcms2-utils Description: Little CMS 2 color management library LittleCMS 2 intends to be a small-footprint color management engine, with special focus on accuracy and performance. It uses the International Color Consortium standard (ICC) of color management. LittleCMS 2 is a full implementation of ICC specification 4.2 plus all addendums. It fully supports all V2 and V4 profiles, including abstract, devicelink and named color profiles. . This package contains the shared library of liblcms2. Homepage: http://www.littlecms.com/ Package: libldap2 Status: install ok installed Priority: optional Section: libs Installed-Size: 576 Maintainer: Debian OpenLDAP Maintainers Architecture: amd64 Multi-Arch: same Source: openldap Version: 2.6.10+dfsg-1 Depends: libc6 (>= 2.38), libsasl2-2 (>= 2.1.28+dfsg1), libssl3t64 (>= 3.0.0) Recommends: libldap-common Description: OpenLDAP libraries These are the run-time libraries for the OpenLDAP (Lightweight Directory Access Protocol) servers and clients. Homepage: https://www.openldap.org/ Package: liblerc4 Status: install ok installed Priority: optional Section: libs Installed-Size: 603 Maintainer: Debian GIS Project Architecture: amd64 Multi-Arch: same Source: lerc Version: 4.0.0+ds-5 Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11) Description: Limited Error Raster Compression library LERC is an open-source image or raster format which supports rapid encoding and decoding for any pixel type (not just RGB or Byte). Users set the maximum compression error per pixel while encoding, so the precision of the original input image is preserved (within user defined error bounds). Homepage: https://github.com/Esri/lerc Package: liblqr-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 84 Maintainer: Bernd Zeimetz Architecture: amd64 Multi-Arch: same Source: liblqr (0.4.2-2.1) Version: 0.4.2-2.1+b2 Depends: libc6 (>= 2.27), libglib2.0-0t64 (>= 2.24.0) Description: converts plain array images into multi-size representation The LiquidRescale (lqr) library provides a C/C++ API for performing non-uniform resizing of images by the seam-carving technique. . The library takes images in plain array format as input and converts them to a multi-size representation. . Following is a list of features: . * Areas in the image can be marked for preservation or discard * Once the image has been fully processed, the scaling can be done in real-time. In fact, the information can be saved and read out later without any further processing * The resizing is done with a single function which automatically performs all the necessary operations; it can also work in successive steps without wasting computational time * Possibility to tune the carving operation by letting the seams be less connected, or more rigid, or both * Can export and import the visibility map (the seams) * Other images can be attached and undergo the same carving process as the parent image * The automatic feature detection algorithm can be tuned by selecting among different energy gradient functions * Reports progress through a customizable interface * A signalling system permits one to cleanly handle errors . The library implements the algorithm described in the paper "Seam Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel Shamir, which can be found at http://www.faculty.idc.ac.il/arik/imret.pdf . This package contains the shared library. Homepage: http://liblqr.wikidot.com/ Package: liblsof0 Status: install ok installed Priority: optional Section: libs Installed-Size: 229 Maintainer: Andres Salomon Architecture: amd64 Source: lsof Version: 4.99.4+dfsg-2 Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~) Description: utility to list open files (shared library) Lsof is a Unix-specific diagnostic tool. Its name stands for LiSt Open Files, and it does just that. It lists information about any files that are open, by processes currently running on the system. . This package contains the shared libraries used by the tool. Homepage: https://github.com/lsof-org/lsof Package: libltdl7 Status: install ok installed Priority: optional Section: libs Installed-Size: 447 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: libtool Version: 2.5.4-4 Depends: libc6 (>= 2.38) Description: System independent dlopen wrapper for GNU libtool This package contains the run-time libltdl library. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Homepage: https://www.gnu.org/software/libtool/ Package: liblz4-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 173 Maintainer: Nobuhiro Iwamatsu Architecture: amd64 Multi-Arch: same Source: lz4 Version: 1.10.0-4 Replaces: liblz4-1a Depends: libc6 (>= 2.14), libxxhash0 (>= 0.6.5) Breaks: liblz4-1a Description: Fast LZ compression algorithm library - runtime LZ4 is a very fast lossless compression algorithm, providing compression speed at 400 MB/s per core, scalable with multi-cores CPU. It also features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limits on multi-core systems. . This package includes the shared library. Homepage: https://github.com/lz4/lz4 Package: liblzf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 36 Maintainer: Timo Röhling Architecture: amd64 Multi-Arch: same Source: liblzf (3.6-4) Version: 3.6-4+b3 Depends: libc6 (>= 2.4) Description: Very small data compression library This library implements the very, very fast LZF compression algorithm written in C. Compression ratios are moderate with 40 to 50 percent for typical binary data, but decompression speed is basically at unoptimized memcpy speed. Homepage: http://software.schmorp.de/pkg/liblzf.html Package: liblzma5 Status: install ok installed Priority: optional Section: libs Installed-Size: 435 Maintainer: Sebastian Andrzej Siewior Architecture: amd64 Multi-Arch: same Source: xz-utils Version: 5.8.1-1 Depends: libc6 (>= 2.34) Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~) Description: XZ-format compression library XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) Homepage: https://tukaani.org/xz/ Package: libmagickcore-7.q16-10 Status: install ok installed Priority: optional Section: libs Installed-Size: 7139 Maintainer: ImageMagick Packaging Team Architecture: amd64 Multi-Arch: same Source: imagemagick Version: 8:7.1.1.43+dfsg1-1+deb13u8 Depends: libbz2-1.0, libc6 (>= 2.38), libfftw3-double3 (>= 3.3.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.17.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.5.4), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.46), libraw23t64 (>= 0.16.0), libtiff6 (>= 4.5.0~rc1), libwebp7 (>= 1.5.0), libwebpdemux2 (>= 1.5.0), libwebpmux3 (>= 1.5.0), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-7-common (>= 8:7.0.0~) Pre-Depends: dpkg (>= 1.17.6) Recommends: ghostscript, fonts-urw-base35 Suggests: libmagickcore-7.q16-10-extra Description: low-level image manipulation library -- quantum depth Q16 The MagickCore API is a low-level interface between the C programming language and the ImageMagick image processing libraries and is recommended for wizard-level programmers only. Unlike the MagickWand C API which uses only a few opaque types and accessors, with MagickCore you almost exclusively access the structure members directly. . This package contains the C libraries needed to run executables that make use of MagickCore. . This version of libmagickcore is compiled for a channel depth of 16 bits (Q16). Homepage: https://www.imagemagick.org/ Package: libmagickwand-7.q16-10 Status: install ok installed Priority: optional Section: libs Installed-Size: 1449 Maintainer: ImageMagick Packaging Team Architecture: amd64 Multi-Arch: same Source: imagemagick Version: 8:7.1.1.43+dfsg1-1+deb13u8 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-7.q16-10 (>= 8:7.1.1.33), libx11-6, imagemagick-7-common (>= 8:7.0.0~) Pre-Depends: dpkg (>= 1.17.6) Description: image manipulation library -- quantum depth Q16 The MagickWand API is the recommended interface between the C programming language and the ImageMagick image processing libraries. Unlike the MagickCore C API, MagickWand uses only a few opaque types. Accessors are available to set or get important wand properties. . This package contains the C libraries needed to run executables that make use of MagickWand. . This version of libmagickwand is compiled for a channel depth of 16 bits (Q16). Homepage: https://www.imagemagick.org/ Package: libmd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 94 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libmd (1.1.0-2) Version: 1.1.0-2+b1 Depends: libc6 (>= 2.33) Description: message digest functions from BSD systems - shared library The libmd library provides various message digest ("hash") functions, as found on various BSDs on a library with the same name and with a compatible API. Homepage: https://www.hadrons.org/software/libmd/ Package: libmnl0 Status: install ok installed Priority: optional Section: libs Installed-Size: 45 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: libmnl Version: 1.0.5-3 Depends: libc6 (>= 2.14) Description: minimalistic Netlink communication library libmnl is a minimalistic user-space library oriented to Netlink developers. There are a lot of common tasks in parsing, validating, constructing of both the Netlink header and TLVs that are repetitive and easy to get wrong. This library aims to provide simple helpers that allows you to re-use code and to avoid re-inventing the wheel. . The main features of this library are: . Small: the shared library requires around 30KB for an x86-based computer. . Simple: this library avoids complexity and elaborated abstractions that tend to hide Netlink details. . Easy to use: the library simplifies the work for Netlink-wise developers. It provides functions to make socket handling, message building, validating, parsing and sequence tracking, easier. . Easy to re-use: you can use the library to build your own abstraction layer on top of this library. . Decoupling: the interdependency of the main bricks that compose the library is reduced, i.e. the library provides many helpers, but the programmer is not forced to use them. . This package contains the shared libraries needed to run programs that use the minimalistic Netlink communication library. Homepage: https://netfilter.org/projects/libmnl/ Package: libmount1 Status: install ok installed Priority: optional Section: libs Installed-Size: 565 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.41-5 Depends: libblkid1 (= 2.41-5), libc6 (>= 2.38), libselinux1 (>= 3.1~) Suggests: cryptsetup-bin Description: device mounting library This device mounting library is used by mount and umount helpers. Homepage: https://github.com/util-linux/util-linux Package: libncursesw6 Status: install ok installed Priority: optional Section: libs Installed-Size: 419 Maintainer: Ncurses Maintainers Architecture: amd64 Multi-Arch: same Source: ncurses Version: 6.5+20250216-2 Depends: libtinfo6 (= 6.5+20250216-2), libc6 (>= 2.34) Recommends: libgpm2 Description: shared libraries for terminal handling (wide character support) The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncursesw, which includes support for wide characters. Homepage: https://invisible-island.net/ncurses/ Package: libnettle8t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 560 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 3.10.1-1 Replaces: libnettle8 Provides: libnettle8 (= 3.10.1-1) Depends: libc6 (>= 2.17) Breaks: libnettle8 (<< 3.10.1-1) Description: low level cryptographic library (symmetric and one-way cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the symmetric and one-way cryptographic algorithms. To avoid having this package depend on libgmp, the asymmetric cryptos reside in a separate library, libhogweed. Homepage: https://www.lysator.liu.se/~nisse/nettle/ Package: libnghttp2-14 Status: install ok installed Priority: optional Section: libs Installed-Size: 229 Maintainer: Tomasz Buchert Architecture: amd64 Multi-Arch: same Source: nghttp2 Version: 1.64.0-1.1+deb13u1 Depends: libc6 (>= 2.17) Description: library implementing HTTP/2 protocol (shared library) This is an implementation of the Hypertext Transfer Protocol version 2 in C. The framing layer of HTTP/2 is implemented as a reusable C library. . This package installs a shared library. Homepage: https://nghttp2.org/ Package: libnghttp3-9 Status: install ok installed Priority: optional Section: libs Installed-Size: 201 Maintainer: Debian Curl Maintainers Architecture: amd64 Multi-Arch: same Source: nghttp3 Version: 1.8.0-1 Depends: libc6 (>= 2.14) Description: HTTP/3 library with QUIC and QPACK (library) nghttp3 implements HTTP/3 functions in C. For now it supports several HTTP actions like request, response and server push. . This package contains the shared library. Homepage: https://github.com/ngtcp2/nghttp3 Package: libngtcp2-16 Status: install ok installed Priority: optional Section: libs Installed-Size: 335 Maintainer: Debian Curl Maintainers Architecture: amd64 Multi-Arch: same Source: ngtcp2 Version: 1.11.0-1+deb13u1 Depends: libc6 (>= 2.25) Description: implementation of QUIC protocol (library) ngtcp2 project is an effort to implement QUIC protocol which is now being discussed in IETF QUICWG for its standardization. . This package contains the shared library. Homepage: https://github.com/ngtcp2/ngtcp2 Package: libngtcp2-crypto-gnutls8 Status: install ok installed Priority: optional Section: libs Installed-Size: 80 Maintainer: Debian Curl Maintainers Architecture: amd64 Multi-Arch: same Source: ngtcp2 Version: 1.11.0-1+deb13u1 Depends: libc6 (>= 2.14), libgnutls30t64 (>= 3.8.2), libngtcp2-16 (>= 1.1.0) Description: implementation of QUIC protocol (library) ngtcp2 project is an effort to implement QUIC protocol which is now being discussed in IETF QUICWG for its standardization. . This package contains the shared library. Homepage: https://github.com/ngtcp2/ngtcp2 Package: libnpth0t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 57 Maintainer: Eric Dorland Architecture: amd64 Multi-Arch: same Source: npth Version: 1.8-3 Replaces: libnpth0 Provides: libnpth0 (= 1.8-3) Depends: libc6 (>= 2.34) Breaks: libnpth0 (<< 1.8-3) Description: replacement for GNU Pth using system threads nPth is a non-preemptive threads implementation using an API very similar to the one known from GNU Pth. It has been designed as a replacement of GNU Pth for non-ancient operating systems. In contrast to GNU Pth it is based on the system's standard threads implementation. Thus nPth allows the use of libraries which are not compatible to GNU Pth. Homepage: https://www.gnupg.org/ Package: libnss-extrausers Status: install ok installed Priority: optional Section: admin Installed-Size: 54 Maintainer: Debian QA Group Architecture: amd64 Version: 0.6-6 Depends: libc6 (>= 2.38) Suggests: libc6-i386 (>= 2.38) Description: nss module to have an additional passwd, shadow and group file This Name Service Switch (NSS) module reads /var/lib/extrausers/passwd, /var/lib/extrausers/shadow and /var/lib/extrausers/groups, allowing to store system accounts and accounts copied from other systems in different files. Package: libnuma1 Status: install ok installed Priority: optional Section: libs Installed-Size: 75 Maintainer: Ian Wienand Architecture: amd64 Multi-Arch: same Source: numactl Version: 2.0.19-1 Depends: libc6 (>= 2.38) Description: Libraries for controlling NUMA policy Library to control specific NUMA (Non-Uniform Memory Architecture) scheduling or memory placement policies. Homepage: https://github.com/numactl/numactl Package: libonig5 Status: install ok installed Priority: optional Section: libs Installed-Size: 677 Maintainer: Jörg Frings-Fürst Architecture: amd64 Multi-Arch: same Source: libonig (6.9.9-1) Version: 6.9.9-1+b1 Depends: libc6 (>= 2.14) Description: regular expressions library Oniguruma is a library for working with regular expressions. . Different character encoding for every regular expression object can be specified. Homepage: https://github.com/kkos/oniguruma Package: libopenjp2-7 Status: install ok installed Priority: optional Section: libs Installed-Size: 532 Maintainer: Debian PhotoTools Maintainers Architecture: amd64 Multi-Arch: same Source: openjpeg2 Version: 2.5.3-2.1~deb13u2 Depends: libc6 (>= 2.34) Description: JPEG 2000 image compression/decompression library OpenJPEG is a library for handling the JPEG 2000 image compression format. JPEG 2000 is a wavelet-based image compression standard and permits progressive transmission by pixel and resolution accuracy for progressive downloads of an encoded image. It supports lossless and lossy compression, supports higher compression than JPEG 1991, and has resilience to errors in the image. . This package contains the runtime files for openjpeg 2.x Homepage: https://www.openjpeg.org Package: libp11-kit0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1882 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: p11-kit Version: 0.25.5-3 Depends: libc6 (>= 2.38), libffi8 (>= 3.4) Description: library for loading and coordinating access to PKCS#11 modules - runtime The p11-kit library provides a way to load and enumerate Public-Key Cryptography Standard #11 modules, along with a standard configuration setup for installing PKCS#11 modules so that they're discoverable. It also solves problems with coordinating the use of PKCS#11 by different components or libraries living in the same process. . This package contains the shared library required for applications loading and accessing PKCS#11 modules. Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html Package: libpam-modules Status: install ok installed Priority: required Section: admin Installed-Size: 923 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: pam Version: 1.7.0-5 Replaces: libpam-umask, libpam0g-util Provides: libpam-mkhomedir, libpam-motd, libpam-umask Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libdb5.3t64, libpam0g (>= 1.4.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.7.0-5) Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask Conffiles: /etc/security/access.conf 55930ab185d7c100b58da36cd44f1dc5 /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36 /etc/security/limits.conf 0b1967ff9042a716ce6b01cb999aa1f5 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc /etc/security/namespace.init 260eb0c3368ffaaf861e003e27618476 /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc /etc/security/pwhistory.conf 46472157dab7894436c6ba3ccdfcaca6 /etc/security/sepermit.conf 3d82df292d497bbeaaf8ebef18cd14f1 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192 Description: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the pam_unix.so module as well as some specialty modules. Homepage: http://www.linux-pam.org/ Package: libpam-modules-bin Status: install ok installed Priority: required Section: admin Installed-Size: 206 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: foreign Source: pam Version: 1.7.0-5 Replaces: libpam-modules (<< 1.5.2-5~) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254) Description: Pluggable Authentication Modules for PAM - helper binaries This package contains helper binaries used by the standard set of PAM modules in the libpam-modules package. Homepage: http://www.linux-pam.org/ Package: libpam-runtime Status: install ok installed Priority: required Section: admin Installed-Size: 1028 Maintainer: Sam Hartman Architecture: all Multi-Arch: foreign Source: pam Version: 1.7.0-5 Replaces: libpam-modules (<< 1.7.0), libpam-modules-bin (<< 1.7.0) Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6) Breaks: libpam-modules (<< 1.7.0), libpam-modules-bin (<< 1.7.0) Conffiles: /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701 Description: Runtime support for the PAM library Contains configuration files and directories required for authentication to work on Debian systems. This package is required on almost all installations. Homepage: http://www.linux-pam.org/ Package: libpam0g Status: install ok installed Priority: optional Section: libs Installed-Size: 194 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: pam Version: 1.7.0-5 Replaces: libpam0g-util, libpam0t64 (<< 1.5.3-5) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0 Suggests: libpam-doc Breaks: libpam0t64 (<< 1.5.3-5) Description: Pluggable Authentication Modules library Contains the shared library for Linux-PAM, a library that enables the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Homepage: http://www.linux-pam.org/ Package: libpaper2 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Giuseppe Sacco Architecture: amd64 Multi-Arch: same Source: libpaper (2.2.5-0.3) Version: 2.2.5-0.3+b2 Provides: libpaperg Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0 Recommends: libpaper-utils Conffiles: /etc/paperspecs 45a157b7a0f2d644bb22e4888bc867dc Description: Paper sizes catalogue Libpaper supports paper size configuration and automates recognition of many different paper sizes for programs that need to deal with paper. . This package contains the shared libraries. Homepage: https://github.com/rrthomas/libpaper Package: libpcre2-8-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 774 Maintainer: Matthew Vernon Architecture: amd64 Multi-Arch: same Source: pcre2 Version: 10.46-1~deb13u1 Depends: libc6 (>= 2.34) Description: New Perl Compatible Regular Expression Library- 8 bit runtime files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the 8 bit runtime library, which operates on ASCII and UTF-8 input. Homepage: https://github.com/PCRE2Project/pcre2 Package: libperl5.40 Status: install ok installed Priority: optional Section: libs Installed-Size: 29315 Maintainer: Niko Tyni Architecture: amd64 Multi-Arch: same Source: perl Version: 5.40.1-6 Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.212), libcompress-raw-zlib-perl (<< 2.212), libcompress-zlib-perl (<< 2.212), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.21), libio-compress-base-perl (<< 2.212), libio-compress-bzip2-perl (<< 2.212), libio-compress-perl (<< 2.212), libio-compress-zlib-perl (<< 2.212), libmime-base64-perl (<< 3.16.01), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.40), libthreads-shared-perl (<< 1.69), libtime-hires-perl (<< 1.9777), libtime-piece-perl (<< 1.3401.01), perl (<< 5.22.0~), perl-base (<< 5.22.0~) Depends: libbz2-1.0, libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libgdbm-compat4t64 (>= 1.18-3), libgdbm6t64 (>= 1.21), zlib1g (>= 1:1.2.3.3), perl-modules-5.40 (>= 5.40.1-6) Suggests: sensible-utils Breaks: libcompress-raw-bzip2-perl (<< 2.212), libcompress-raw-zlib-perl (<< 2.212), libcompress-zlib-perl (<< 2.212), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.21), libfilter-perl (<< 1.64), libio-compress-base-perl (<< 2.212), libio-compress-bzip2-perl (<< 2.212), libio-compress-perl (<< 2.212), libio-compress-zlib-perl (<< 2.212), libmime-base64-perl (<< 3.16.01), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.40), libthreads-shared-perl (<< 1.69), libtime-hires-perl (<< 1.9777), libtime-piece-perl (<< 1.3401.01) Description: shared Perl library This package contains the shared Perl library, used by applications which embed a Perl interpreter. . It also contains the architecture-dependent parts of the standard library (and depends on perl-modules-5.40 which contains the architecture-independent parts). Homepage: https://dev.perl.org/perl5/ Package: libpng16-16t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 444 Maintainer: Maintainers of libpng1.6 packages Architecture: amd64 Multi-Arch: same Source: libpng1.6 Version: 1.6.48-1+deb13u5 Replaces: libpng16-16 Provides: libpng16-16 (= 1.6.48-1+deb13u5) Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.3.4) Breaks: libpng16-16 (<< 1.6.48-1+deb13u5) Description: PNG library - runtime (version 1.6) libpng is a library implementing an interface for reading and writing PNG (Portable Network Graphics) format files. . This package contains the runtime library files needed to run software using libpng. Homepage: http://libpng.org/pub/png/libpng.html Package: libpopt0 Status: install ok installed Priority: optional Section: libs Installed-Size: 245 Maintainer: Håvard F. Aasen Architecture: amd64 Multi-Arch: same Source: popt Version: 1.19+dfsg-2 Depends: libc6 (>= 2.38) Description: lib for parsing cmdline parameters Popt was heavily influenced by the getopt() and getopt_long() functions, but it allows more powerful argument expansion. It can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. It also allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules. . This package contains the runtime library and locale data. Homepage: https://github.com/rpm-software-management/popt Package: libproc2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 237 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: procps Version: 2:4.0.4-9 Replaces: procps (<< 1:3.3.2-1) Depends: libc6 (>= 2.38), libsystemd0 Description: library for accessing process information from /proc The libproc2 library is a way of accessing information out of the /proc filesystem. . This package contains the shared libraries necessary to run programs compiled with libproc2. Homepage: https://gitlab.com/procps-ng/procps Package: libpsl5t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 100 Maintainer: Tim Rühsen Architecture: amd64 Multi-Arch: same Source: libpsl (0.21.2-1.1) Version: 0.21.2-1.1+b1 Replaces: libpsl5 Provides: libpsl5 (= 0.21.2-1.1+b1) Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring5 (>= 1.1) Recommends: publicsuffix (>= 20150507) Breaks: libpsl5 (<< 0.21.2-1.1) Description: Library for Public Suffix List (shared libraries) Libpsl allows checking domains against the Public Suffix List. It can be used to avoid privacy-leaking 'super-cookies', 'super domain' certificates, for domain highlighting purposes sorting domain lists by site and more. . Please see https://publicsuffix.org for more detailed information. . This package contains runtime libraries. Homepage: https://github.com/rockdaboot/libpsl Package: librav1e0.7 Status: install ok installed Priority: optional Section: libs Installed-Size: 3238 Maintainer: Debian Rust Maintainers Architecture: amd64 Multi-Arch: same Source: rust-rav1e (0.7.1-9) Version: 0.7.1-9+b2 Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2) Description: Fastest and safest AV1 encoder - shared library rav1e is a encoder for the AV1 video codec. . This package contains the shared library. Homepage: https://github.com/xiph/rav1e/ Package: libraw23t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 2450 Maintainer: Debian PhotoTools Maintainers Architecture: amd64 Multi-Arch: same Source: libraw Version: 0.21.4-2 Replaces: libraw23 Provides: libraw23 (= 0.21.4-2) Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgomp1 (>= 6), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libstdc++6 (>= 5.2) Breaks: libraw23 (<< 0.21.4-2) Description: raw image decoder library LibRaw is a library for reading RAW files obtained from digital photo cameras (CRW/CR2, NEF, RAF, DNG, and others). . This package contains the shared library. Homepage: https://www.libraw.org Package: libreadline8t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 485 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: readline Version: 8.2-6 Replaces: libreadline8 Provides: libreadline8 (= 8.2-6) Depends: readline-common, libc6 (>= 2.38), libtinfo6 (>= 6) Breaks: libreadline8 (<< 8.2-6) Description: GNU readline and history libraries, run-time libraries The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html Package: librtmp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 144 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: rtmpdump (2.4+20151223.gitfa8646d.1-2) Version: 2.4+20151223.gitfa8646d.1-2+b5 Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30t64 (>= 3.8.1), libhogweed6t64, libnettle8t64, zlib1g (>= 1:1.1.4) Description: toolkit for RTMP streams (shared library) A small dumper for media content streamed over the RTMP protocol (like BBC's iPlayer high quality streams). Supplying an RTMP URL will result in a dumped flv file, which can be played/transcoded with standard tools. . This package contains the shared libraries, header files needed by programs that want to use librtmp. Homepage: http://rtmpdump.mplayerhq.hu/ Package: libsasl2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 156 Maintainer: Debian Cyrus Team Architecture: amd64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.28+dfsg1-9 Replaces: libsasl2 Depends: libsasl2-modules-db (>= 2.1.28+dfsg1-9), libc6 (>= 2.38), libssl3t64 (>= 3.0.0) Recommends: libsasl2-modules (>= 2.1.28+dfsg1-9) Description: Cyrus SASL - authentication abstraction library This is the Cyrus SASL API implementation, version 2.1. . SASL is the Simple Authentication and Security Layer, a method for adding authentication support to connection-based protocols. To use SASL, a protocol includes a command for identifying and authenticating a user to a server and for optionally negotiating protection of subsequent protocol interactions. If its use is negotiated, a security layer is inserted between the protocol and the connection. See RFC 2222 for more information. . Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used. Homepage: https://www.cyrusimap.org/sasl/ Package: libsasl2-modules-db Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Debian Cyrus Team Architecture: amd64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.28+dfsg1-9 Depends: libc6 (>= 2.14), libdb5.3t64 Description: Cyrus SASL - pluggable authentication modules (DB) This is the Cyrus SASL API implementation, version 2.1. See package libsasl2-2 and RFC 2222 for more information. . This package provides the DB plugin, which supports Berkeley DB lookups. Homepage: https://www.cyrusimap.org/sasl/ Package: libseccomp2 Status: install ok installed Priority: optional Section: libs Installed-Size: 201 Maintainer: Kees Cook Architecture: amd64 Multi-Arch: same Source: libseccomp Version: 2.6.0-2 Depends: libc6 (>= 2.14) Description: high level interface to Linux seccomp filter This library provides a high level interface to constructing, analyzing and installing seccomp filters via a BPF passed to the Linux Kernel's prctl() syscall. Homepage: https://github.com/seccomp/libseccomp Package: libselinux1 Status: install ok installed Priority: optional Section: libs Installed-Size: 229 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libselinux Version: 3.8.1-1 Depends: libc6 (>= 2.38), libpcre2-8-0 (>= 10.22) Description: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Homepage: https://github.com/SELinuxProject Package: libsemanage-common Status: install ok installed Priority: optional Section: libs Installed-Size: 21 Maintainer: Debian SELinux maintainers Architecture: all Multi-Arch: foreign Source: libsemanage Version: 3.8.1-1 Conffiles: /etc/selinux/semanage.conf 8e8dfac33a09c1b53ca08bf6d4201b10 Description: Common files for SELinux policy management libraries This package provides the common files used by the shared libraries for SELinux policy management. . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: https://selinuxproject.org Package: libsemanage2 Status: install ok installed Priority: optional Section: libs Installed-Size: 313 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsemanage Version: 3.8.1-1 Depends: libsemanage-common (>= 3.8.1-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.38), libselinux1 (>= 3.8.1), libsepol2 (>= 3.8.1) Description: SELinux policy management library This package provides the shared libraries for SELinux policy management. It uses libsepol for binary policy manipulation and libselinux for interacting with the SELinux system. It also exec's helper programs for loading policy and for checking whether the file_contexts configuration is valid (load_policy and setfiles from policycoreutils) presently, although this may change at least for the bootstrapping case . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: https://selinuxproject.org Package: libsepol2 Status: install ok installed Priority: optional Section: libs Installed-Size: 835 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsepol Version: 3.8.1-1 Depends: libc6 (>= 2.38) Description: SELinux library for manipulating binary security policies Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. . libsepol provides an API for the manipulation of SELinux binary policies. It is used by checkpolicy (the policy compiler) and similar tools, as well as by programs like load_policy that need to perform specific transformations on binary policies such as customizing policy boolean settings. Homepage: https://selinuxproject.org Package: libsharpyuv0 Status: install ok installed Priority: optional Section: libs Installed-Size: 143 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.5.0-0.1 Depends: libc6 (>= 2.29) Description: Library for sharp RGB to YUV conversion This library provides the function to convert RGB to YUV420 using a downsampling algorithm that minimizes artefacts caused by chroma subsampling. . This package provides the shared library files. Homepage: https://developers.google.com/speed/webp/ Package: libsm6 Status: install ok installed Priority: optional Section: libs Installed-Size: 74 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libsm Version: 2:1.2.6-1 Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16) Description: X11 Session Management library This package provides the main interface to the X11 Session Management library, which allows for applications to both manage sessions, and make use of session managers to save and restore their state for later use. . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libSM Homepage: https://www.x.org Package: libsmartcols1 Status: install ok installed Priority: optional Section: libs Installed-Size: 377 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.41-5 Depends: libc6 (>= 2.38) Description: smart column output alignment library This smart column output alignment library is used by fdisk utilities. Homepage: https://github.com/util-linux/util-linux Package: libsodium23 Status: install ok installed Priority: optional Section: libs Installed-Size: 431 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: libsodium Version: 1.0.18-1+deb13u1 Depends: libc6 (>= 2.34) Description: Network communication, cryptography and signaturing library NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. . NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. . Sodium is a portable, cross-compilable, installable, packageable fork of NaCl, with a compatible API. Homepage: https://www.libsodium.org/ Package: libsqlite3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1834 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: sqlite3 Version: 3.46.1-7+deb13u1 Depends: libc6 (>= 2.38) Breaks: crowdsec (<< 1.4), python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~) Description: SQLite 3 shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Homepage: https://www.sqlite.org/ Package: libssh2-1t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 437 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: libssh2 Version: 1.11.1-1 Replaces: libssh2-1 Provides: libssh2-1 (= 1.11.1-1) Depends: libc6 (>= 2.25), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4) Breaks: libssh2-1 (<< 1.11.1-1) Description: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Homepage: https://libssh2.org/ Package: libssl3t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 8099 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: same Source: openssl Version: 3.5.6-1~deb13u1 Replaces: libssl3 Provides: libssl3 (= 3.5.6-1~deb13u1) Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4), openssl-provider-legacy Breaks: freeradius (<< 3.2.7+dfsg-1+deb13u1), libssl3 (<< 3.5.6-1~deb13u1), openssh-client (<< 1:9.4p1), openssh-server (<< 1:9.4p1), python3-m2crypto (<< 0.38.0-4) Description: Secure Sockets Layer toolkit - shared libraries This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It provides the libssl and libcrypto shared libraries. Homepage: https://openssl-library.org Package: libstdc++6 Status: install ok installed Priority: optional Section: libs Installed-Size: 3019 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-14 Version: 14.2.0-19 Replaces: libstdc++6-14-dbg (<< 4.9.0-3) Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38), libgcc-s1 (>= 4.3) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Conflicts: scim (<< 1.4.2-1) Description: GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Homepage: http://gcc.gnu.org/ Package: libsvtav1enc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 7839 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: svt-av1 Version: 2.3.0+dfsg-1 Depends: libc6 (>= 2.34) Description: Scalable Video Technology for AV1 (libsvtav1enc shared library) The Scalable Video Technology for AV1 (SVT-AV1 Encoder) is an AV1-compliant encoder library core. The SVT-AV1 encoder development is a work-in-progress targeting performance levels applicable to both VOD and Live encoding / transcoding video applications. The SVT-AV1 decoder implementation is targeting future codec research activities. . This package provides the shared library libsvtav1enc. Homepage: https://gitlab.com/AOMediaCodec/SVT-AV1 Package: libsystemd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1223 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 257.13-1~deb13u1 Depends: libc6 (>= 2.39), libcap2 (>= 1:2.10) Recommends: libzstd1 Suggests: libgcrypt20, liblz4-1, liblzma5 Description: systemd utility library This library provides APIs to interface with various system components such as the system journal, the system service manager, D-Bus and more. Homepage: https://systemd.io Package: libtasn1-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 122 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Version: 4.20.0-2 Depends: libc6 (>= 2.38) Description: Manage ASN.1 structures (runtime) Manage ASN1 (Abstract Syntax Notation One) structures. The main features of this library are: * on-line ASN1 structure management that doesn't require any C code file generation. * off-line ASN1 structure management with C code file generation containing an array. * DER (Distinguish Encoding Rules) encoding * no limits for INTEGER and ENUMERATED values . This package contains runtime libraries. Homepage: https://www.gnu.org/software/libtasn1/ Package: libtidy58 Status: install ok installed Priority: optional Section: libs Installed-Size: 1091 Maintainer: Tidy HTML5 Architecture: amd64 Multi-Arch: same Source: tidy-html5 Version: 2:5.8.0-2 Depends: libc6 (>= 2.33) Description: HTML/XML syntax checker and reformatter - shared library Tidy corrects and cleans up HTML and XML documents by fixing markup errors and upgrading legacy code to modern standards. . This package contains the libtidy shared library. Homepage: https://www.html-tidy.org/ Package: libtiff6 Status: install ok installed Priority: optional Section: libs Installed-Size: 766 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: tiff Version: 4.7.0-3+deb13u2 Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblerc4 (>= 3.0), liblzma5 (>= 5.1.1alpha+20120614), libwebp7 (>= 1.5.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4) Breaks: libimager-perl (<< 1.022+dfsg) Description: Tag Image File Format (TIFF) library libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. This package includes the shared library. Homepage: https://libtiff.gitlab.io/libtiff/ Package: libtinfo6 Status: install ok installed Priority: optional Section: libs Installed-Size: 569 Maintainer: Ncurses Maintainers Architecture: amd64 Multi-Arch: same Source: ncurses Version: 6.5+20250216-2 Depends: libc6 (>= 2.34) Breaks: tmux (<< 3.3a-4) Description: shared low-level terminfo library for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared low-level terminfo library. Homepage: https://invisible-island.net/ncurses/ Package: libtirpc-common Status: install ok installed Priority: optional Section: libs Installed-Size: 32 Maintainer: Josue Ortega Architecture: all Multi-Arch: foreign Source: libtirpc Version: 1.3.6+ds-1 Replaces: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~) Breaks: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~) Conffiles: /etc/netconfig ca8db53e3af4d735335c2607d21c7195 Description: transport-independent RPC library - common files This package contains a port of Sun's transport-independent RPC library to Linux. The library is intended as a replacement for the RPC code in the GNU C library, providing among others support for RPC (and in turn, NFS) over IPv6. . This package contains the netconfig configuration file as well as the associated manpage. Homepage: http://sourceforge.net/projects/libtirpc Package: libtirpc3t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 236 Maintainer: Josue Ortega Architecture: amd64 Multi-Arch: same Source: libtirpc Version: 1.3.6+ds-1 Replaces: libtirpc3 Provides: libtirpc3 (= 1.3.6+ds-1) Depends: libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.6+ds-1) Breaks: libtirpc3 (<< 1.3.6+ds-1), nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7) Description: transport-independent RPC library This package contains a port of Sun's transport-independent RPC library to Linux. The library is intended as a replacement for the RPC code in the GNU C library, providing among others support for RPC (and in turn, NFS) over IPv6. Homepage: http://sourceforge.net/projects/libtirpc Package: libudev1 Status: install ok installed Priority: optional Section: libs Installed-Size: 357 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 257.13-1~deb13u1 Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10) Suggests: libidn2-0 Description: libudev shared library This library provides APIs to introspect and enumerate devices on the local system. Homepage: https://systemd.io Package: libunistring5 Status: install ok installed Priority: optional Section: libs Installed-Size: 2092 Maintainer: Jörg Frings-Fürst Architecture: amd64 Multi-Arch: same Source: libunistring Version: 1.3-2 Depends: libc6 (>= 2.34) Description: Unicode string library for C The 'libunistring' library implements Unicode strings (in the UTF-8, UTF-16, and UTF-32 encodings), together with functions for Unicode characters (character names, classifications, properties) and functions for string processing (formatted output, width, word breaks, line breaks, normalization, case folding, regular expressions). . This package contains the shared library. Homepage: https://www.gnu.org/software/libunistring/ Package: libuuid1 Status: install ok installed Priority: optional Section: libs Installed-Size: 98 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.41-5 Replaces: libuuid1t64 Provides: libuuid1t64 (= 2.41-5) Depends: libc6 (>= 2.38) Suggests: uuid-runtime Breaks: libuuid1t64 (<< 2.41-5) Description: Universally Unique ID library The libuuid library generates and parses 128-bit Universally Unique IDs (UUIDs). A UUID is an identifier that is unique within the space of all such identifiers across both space and time. It can be used for multiple purposes, from tagging objects with an extremely short lifetime to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Homepage: https://github.com/util-linux/util-linux Package: libuv1t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 321 Maintainer: Dominique Dumont Architecture: amd64 Multi-Arch: same Source: libuv1 Version: 1.50.0-2 Replaces: libuv1 Provides: libuv1 (= 1.50.0-2) Depends: libc6 (>= 2.38) Breaks: libuv1 (<< 1.48.0-1.1) Description: asynchronous event notification library - runtime library Libuv is the asynchronous library behind Node.js. Very similar to libevent or libev, it provides the main elements for event driven systems: watching and waiting for availability in a set of sockets, and some other events like timers or asynchronous messages. However, libuv also comes with some other extras like: * files watchers and asynchronous operations * a portable TCP and UDP API, as well as asynchronous DNS resolution * processes and threads management, and a portable inter-process communications mechanism, with pipes and work queues * a plugins mechanism for loading libraries dynamically * interface with external libraries that also need to access the I/O. . This package includes the dynamic library against which you can link your program. Homepage: https://github.com/libuv/libuv Package: libwebp7 Status: install ok installed Priority: optional Section: libs Installed-Size: 631 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.5.0-0.1 Depends: libc6 (>= 2.34), libsharpyuv0 (>= 1.5.0) Description: Lossy compression of digital photographic images (shared library) Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebpdemux2 Status: install ok installed Priority: optional Section: libs Installed-Size: 139 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.5.0-0.1 Depends: libc6 (>= 2.14), libwebp7 (>= 1.5.0) Description: Lossy compression of digital photographic images (libwebpdemux library) Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebpmux3 Status: install ok installed Priority: optional Section: libs Installed-Size: 171 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.5.0-0.1 Depends: libc6 (>= 2.29), libwebp7 (>= 1.5.0) Description: Lossy compression of digital photographic images (libwebpmux library) Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libx11-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1638 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libx11 Version: 2:1.8.12-1 Depends: libc6 (>= 2.38), libxcb1 (>= 1.11.1), libx11-data Breaks: libx11-xcb1 (<< 2:1.7.0-2) Description: X11 client-side library This package provides a client interface to the X Window System, otherwise known as 'Xlib'. It provides a complete API for the basic functions of the window system. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libX11 Package: libx11-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 1576 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: libx11 Version: 2:1.8.12-1 Description: X11 client-side library This package provides the locale data files for libx11. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libX11 Package: libx265-215 Status: install ok installed Priority: optional Section: libs Installed-Size: 16788 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: x265 Version: 4.1-2 Depends: libc6 (>= 2.38), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1) Description: H.265/HEVC video stream encoder (shared library) libx265 is an encoding library for creating H.265/High Efficiency Video Coding (HEVC) video streams. . This package contains the shared library. Homepage: https://bitbucket.org/multicoreware/x265_git Package: libxau6 Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxau Version: 1:1.0.11-1 Depends: libc6 (>= 2.33) Description: X11 authorisation library This package provides the main interface to the X11 authorisation handling, which controls authorisation for X connections, both client-side and server-side. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libxau Package: libxcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 301 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb (1.17.0-2) Version: 1.17.0-2+b1 Depends: libc6 (>= 2.38), libxau6 (>= 1:1.0.9), libxdmcp6 Description: X C Binding This package contains the library files needed to run software using libxcb, the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxdmcp6 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxdmcp Version: 1:1.1.5-1 Depends: libc6 (>= 2.36) Description: X11 Display Manager Control Protocol library This package provides the main interface to the X11 display manager control protocol library, which allows for remote logins to display managers. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libXdmcp Package: libxext6 Status: install ok installed Priority: optional Section: libs Installed-Size: 129 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxext (2:1.3.4-1) Version: 2:1.3.4-1+b3 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Description: X11 miscellaneous extension library libXext provides an X Window System client interface to several extensions to the X protocol. . The supported protocol extensions are: - DOUBLE-BUFFER (DBE), the Double Buffer extension; - DPMS, the VESA Display Power Management System extension; - Extended-Visual-Information (EVI), an extension for gathering extra information about the X server's visuals; - LBX, the Low Bandwidth X extension; - MIT-SHM, the MIT X client/server shared memory extension; - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; - Multi-Buffering, the multi-buffering and stereo display extension; - SECURITY, the X security extension; - SHAPE, the non-rectangular shaped window extension; - SYNC, the X synchronization extension; - TOG-CUP, the Open Group's Colormap Utilization extension; - XC-APPGROUP, the X Consortium's Application Group extension; - XC-MISC, the X Consortium's resource ID querying extension; - XTEST, the X test extension (this is one of two client-side implementations; the other is in the libXtst library, provided by the libxtst6 package); . libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXext Package: libxml2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1915 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Version: 2.12.7+dfsg+really2.9.14-2.1+deb13u2 Depends: libc6 (>= 2.38), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3) Conflicts: w3c-dtd-xhtml Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides a library providing an extensive API to handle such XML data files. Homepage: http://xmlsoft.org Package: libxslt1.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 497 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Source: libxslt Version: 1.1.35-1.2+deb13u3 Depends: libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libxml2 (>= 2.9.0) Description: XSLT 1.0 processing library - runtime library XSLT is an XML language for defining transformations of XML files from XML to some other arbitrary format, such as XML, HTML, plain text, etc. using standard XSLT stylesheets. libxslt is a C library which implements XSLT version 1.0. . This package contains the libxslt library used by applications for XSLT transformations. Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home Package: libxt6t64 Status: install ok installed Priority: optional Section: libs Installed-Size: 490 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxt (1:1.2.1-1.2) Version: 1:1.2.1-1.2+b2 Replaces: libxt6 Provides: libxt6 (= 1:1.2.1-1.2+b2) Depends: libc6 (>= 2.33), libice6 (>= 1:1.0.0), libsm6, libx11-6 Breaks: libxt6 (<< 1:1.2.1-1.2) Description: X11 toolkit intrinsics library libXt provides the X Toolkit Intrinsics, an abstract widget library upon which other toolkits are based. Xt is the basis for many toolkits, including the Athena widgets (Xaw), and LessTif (a Motif implementation). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXt Package: libxtables12 Status: install ok installed Priority: optional Section: libs Installed-Size: 101 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: iptables Version: 1.8.11-2 Depends: libc6 (>= 2.34) Description: netfilter xtables library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . However, even if a given system may be fully running on native nftables, there are other reasons why libxtables might be installed. For one, nftables itself uses it to be able to display old rulesets that were created using xtables extensions (to help folks migrate). Other third-party software might also be linked to this library. . This library being installed in the system should be harmless in any case. . This package contains the user-space interface to the Netfilter xtables kernel framework. Homepage: https://www.netfilter.org/ Package: libxxhash0 Status: install ok installed Priority: optional Section: libs Installed-Size: 92 Maintainer: Josue Ortega Architecture: amd64 Multi-Arch: same Source: xxhash Version: 0.8.3-2 Depends: libc6 (>= 2.14) Description: shared library for xxhash xxHash is an Extremely fast Hash algorithm, running at RAM speed limits. It successfully completes the SMHasher test suite which evaluates collision, dispersion and randomness qualities of hash functions. Code is highly portable, and hashes are identical on all platforms (little / big endian). . This package contains the shared library. Homepage: https://cyan4973.github.io/xxHash Package: libyuv0 Status: install ok installed Priority: optional Section: libs Installed-Size: 696 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libyuv Version: 0.0.1904.20250204-1 Replaces: libyuv Provides: libyuv Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libstdc++6 (>= 5) Conflicts: libyuv Description: Library for YUV scaling (shared library) libyuv is an open source project that includes YUV scaling and conversion functionality. . This package provides the shared library. Homepage: https://chromium.googlesource.com/libyuv/libyuv/ Package: libzip5 Status: install ok installed Priority: optional Section: libs Installed-Size: 160 Maintainer: Debian Libzip Maintainers Architecture: amd64 Multi-Arch: same Source: libzip Version: 1.11.3-2 Depends: libbz2-1.0, libc6 (>= 2.36), liblzma5 (>= 5.1.1alpha+20120614), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4) Description: library for reading, creating, and modifying zip archives (runtime) libzip is a C library for reading, creating, and modifying zip archives. Files can be added from data buffers, files, or compressed data copied directly from other zip archives. Changes made without closing the archive can be reverted. . This package contains the files necessary for running applications that use the libzip library. Homepage: https://libzip.org Package: libzstd1 Status: install ok installed Priority: optional Section: libs Installed-Size: 847 Maintainer: RPM packaging team Architecture: amd64 Multi-Arch: same Source: libzstd Version: 1.5.7+dfsg-1 Depends: libc6 (>= 2.34) Description: fast lossless compression algorithm Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the shared library. Homepage: https://github.com/facebook/zstd Package: linux-libc-dev Status: install ok installed Priority: optional Section: devel Installed-Size: 10869 Maintainer: Debian Kernel Team Architecture: all Multi-Arch: foreign Source: linux Version: 6.12.88-1 Description: Linux support headers for userspace development This package provides userspaces headers from the Linux kernel. These files are going to be installed into /usr/include, and are used by the installed headers for GNU libc and other system libraries. Homepage: https://www.kernel.org/ Package: login Protected: yes Status: install ok installed Priority: required Section: admin Installed-Size: 284 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: foreign Source: util-linux (2.41-5) Version: 1:4.16.0-2+really2.41-5 Depends: libpam-modules, libpam-runtime, libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1) Pre-Depends: login.defs (>= 1:4.16.0-1~) Conffiles: /etc/pam.d/login b6129a3c1af42a9977b29f490ecd057e Description: system login tools This package provides support for console-based logins and for changing effective user or group IDs, including: * login, the program that invokes a user shell on a virtual terminal, * nologin, a dummy shell for disabled user accounts, * newgrp, a program to change the effective group IDs. Homepage: https://github.com/util-linux/util-linux Package: login.defs Status: install ok installed Priority: required Section: admin Installed-Size: 214 Maintainer: Shadow package maintainers Architecture: all Multi-Arch: foreign Source: shadow Version: 1:4.17.4-2 Replaces: login (<< 1:4.16.0-2~) Conffiles: /etc/login.defs f4e7091da823fd58589e991a2f9c2d96 Description: system user management configuration This package provides the login.defs configuration file, used by otherwise unrelated tools managing system users. Homepage: https://github.com/shadow-maint/shadow Package: lsb-release Status: install ok installed Priority: optional Section: misc Installed-Size: 17 Maintainer: Gioele Barabucci Architecture: all Multi-Arch: foreign Source: lsb-release-minimal Version: 12.1-1 Description: Linux Standard Base version reporting utility (minimal implementation) The Linux Standard Base (http://www.linuxbase.org/) is a standard core system that third-party applications written for Linux can depend upon. . The lsb_release command is a simple tool to help identify the Linux distribution being used and its compliance with the Linux Standard Base. . This package contains a bare-bones implementation that uses the information in /etc/os-release instead of relying on LSB packages. Homepage: https://gioele.io/lsb-release-minimal Package: lsof Status: install ok installed Priority: standard Section: utils Installed-Size: 492 Maintainer: Andres Salomon Architecture: amd64 Version: 4.99.4+dfsg-2 Depends: liblsof0 (= 4.99.4+dfsg-2), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtirpc3t64 (>= 1.0.2) Description: utility to list open files Lsof is a Unix-specific diagnostic tool. Its name stands for LiSt Open Files, and it does just that. It lists information about any files that are open, by processes currently running on the system. . This package contains the classic lsof command line tool. Homepage: https://github.com/lsof-org/lsof Package: mawk Status: install ok installed Priority: required Section: interpreters Installed-Size: 292 Maintainer: Boyuan Yang Architecture: amd64 Multi-Arch: foreign Version: 1.3.4.20250131-1 Provides: awk Depends: libc6 (>= 2.38) Description: Pattern scanning and text processing language Mawk is an interpreter for the AWK Programming Language. The AWK language is useful for manipulation of data files, text retrieval and processing, and for prototyping and experimenting with algorithms. Mawk is a new awk meaning it implements the AWK language as defined in Aho, Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms to the POSIX 1003.2 (draft 11.3) definition of the AWK language which contains a few features not described in the AWK book, and mawk provides a small number of extensions. . Mawk is smaller and much faster than gawk. It has some compile-time limits such as NF = 32767 and sprintf buffer = 1020. Homepage: https://invisible-island.net/mawk/ Package: mount Status: install ok installed Priority: required Section: admin Installed-Size: 496 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.41-5 Pre-Depends: libblkid1 (= 2.41-5), libc6 (>= 2.38), libmount1 (= 2.41-5), libselinux1 (>= 3.1~), libsmartcols1 (= 2.41-5) Suggests: nfs-common Description: tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Homepage: https://github.com/util-linux/util-linux Package: nano Status: install ok installed Priority: important Section: editors Installed-Size: 2839 Maintainer: Jordi Mallach Architecture: amd64 Version: 8.4-1+deb13u1 Replaces: nano-tiny (<< 2.8.6-2), pico Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libtinfo6 (>= 6) Suggests: hunspell Breaks: nano-tiny (<< 2.8.6-2) Conflicts: pico Conffiles: /etc/nanorc b30e7a873df86d742e539d3e3f2a3826 Description: small, friendly text editor inspired by Pico GNU nano is an easy-to-use text editor originally designed as a replacement for Pico, the ncurses-based editor from the non-free mailer package Pine (itself now available under the Apache License as Alpine). . However, GNU nano also implements many features missing in Pico, including: - undo/redo - line numbering - syntax coloring - soft-wrapping of overlong lines - selecting text by holding Shift - interactive search and replace (with regular expression support) - a go-to line (and column) command - support for multiple file buffers - auto-indentation - tab completion of filenames and search terms - toggling features while running - and full internationalization support Homepage: https://www.nano-editor.org/ Package: ncdu Status: install ok installed Priority: optional Section: admin Installed-Size: 119 Maintainer: Christian Göttsche Architecture: amd64 Version: 1.22-1 Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6) Description: ncurses disk usage viewer Ncdu is a ncurses-based du viewer. It provides a fast and easy-to-use interface through famous du utility. It allows one to browse through the directories and show percentages of disk usage with ncurses library. Homepage: https://dev.yorhel.nl/ncdu/ Package: ncurses-base Essential: yes Status: install ok installed Priority: required Section: misc Installed-Size: 389 Maintainer: Ncurses Maintainers Architecture: all Multi-Arch: foreign Source: ncurses Version: 6.5+20250216-2 Replaces: ncurses-term (<< 6.4+20230603) Provides: ncurses-runtime Breaks: cryptsetup-initramfs (<< 2:2.6.1), ncurses-term (<< 6.4+20230625), neovim (<< 0.6.0), vim-common (<< 2:9.0.1000-2) Conffiles: /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171 Description: basic terminal type definitions The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains terminfo data files to support the most common types of terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Homepage: https://invisible-island.net/ncurses/ Package: ncurses-bin Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 665 Maintainer: Ncurses Maintainers Architecture: amd64 Multi-Arch: foreign Source: ncurses Version: 6.5+20250216-2 Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.4+20230603) Description: terminal-related programs and man pages The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the programs used for manipulating the terminfo database and individual terminfo entries, as well as some programs for resetting terminals and such. Homepage: https://invisible-island.net/ncurses/ Package: net-tools Status: install ok installed Priority: important Section: net Installed-Size: 988 Maintainer: net-tools Team Architecture: amd64 Multi-Arch: foreign Version: 2.10-1.3 Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~) Description: NET-3 networking toolkit This package includes the important tools for controlling the network subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp, nameif and route. Additionally, this package contains utilities relating to particular network hardware types (plipconfig, slattach, mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr). . In the upstream package 'hostname' and friends are included. Those are not installed by this package, since there is a special "hostname*.deb". Homepage: http://sourceforge.net/projects/net-tools/ Package: netbase Status: install ok installed Priority: important Section: admin Installed-Size: 35 Maintainer: Marco d'Itri Architecture: all Multi-Arch: foreign Version: 6.5 Replaces: ebtables (<< 2.0.11-2) Breaks: ebtables (<< 2.0.11-2) Conffiles: /etc/ethertypes 73ca398498fe517e724cc9238612e10d /etc/protocols 0c247591a720f534fe543401bd4844d6 /etc/rpc 2d7748cd0feba2e43ee52d4d7f834188 /etc/services c7e42bc25f943cb5e1e9e7efdbd23783 Description: Basic TCP/IP networking system This package provides the necessary infrastructure for basic TCP/IP based networking. . In particular, it supplies common name-to-number mappings in /etc/services, /etc/rpc, /etc/protocols and /etc/ethertypes. Package: openssh-client Status: install ok installed Priority: standard Section: net Installed-Size: 5011 Maintainer: Debian OpenSSH Maintainers Architecture: amd64 Multi-Arch: foreign Source: openssh Version: 1:10.0p1-7+deb13u4 Replaces: openssh-sk-helper, ssh, ssh-krb5 Provides: ssh-client Depends: adduser, init-system-helpers (>= 1.66~), passwd, libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4) Recommends: xauth Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass Breaks: openssh-sk-helper Conflicts: sftp Conffiles: /etc/ssh/ssh_config 0f05748bffda634f4fb2b23dce8db1c4 Description: secure shell (SSH) client, for secure access to remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the ssh, scp and sftp clients, the ssh-agent and ssh-add programs to make public key authentication more convenient, and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities. . In some countries it may be illegal to use any encryption at all without a special permit. . ssh replaces the insecure rsh, rcp and rlogin programs, which are obsolete for most purposes. Homepage: https://www.openssh.com/ Package: openssl Status: install ok installed Priority: optional Section: utils Installed-Size: 2506 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: foreign Version: 3.5.6-1~deb13u1 Depends: libc6 (>= 2.34), libssl3t64 (>= 3.5.0) Suggests: ca-certificates Conffiles: /etc/ssl/openssl.cnf bfdc30bd205b6ca2c15a46b17721c6f2 Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains the general-purpose command line binary /usr/bin/openssl, useful for cryptographic operations such as: * creating RSA, DH, and DSA key parameters; * creating X.509 certificates, CSRs, and CRLs; * calculating message digests; * encrypting and decrypting with ciphers; * testing SSL/TLS clients and servers; * handling S/MIME signed or encrypted mail. Homepage: https://openssl-library.org Package: openssl-provider-legacy Status: install ok installed Priority: optional Section: utils Installed-Size: 420 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: foreign Source: openssl Version: 3.5.6-1~deb13u1 Replaces: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5) Depends: libc6 (>= 2.14), libssl3t64 (>= 3.0.3) Breaks: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5) Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . This package contains the legacy provider. The OpenSSL legacy provider supplies OpenSSL implementations of algorithms that have been deemed legacy. Such algorithms have commonly fallen out of use, have been deemed insecure by the cryptography community, or something similar. For details see OSSL_PROVIDER-legacy man page. Homepage: https://openssl-library.org Package: passwd Status: install ok installed Priority: required Section: admin Installed-Size: 4758 Maintainer: Shadow package maintainers Architecture: amd64 Multi-Arch: foreign Source: shadow Version: 1:4.17.4-2 Replaces: login (<< 1:4.16.0-2~) Depends: base-passwd (>= 3.6.4), libpam-modules, login.defs, libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.11.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.32) Recommends: sensible-utils Conffiles: /etc/default/useradd e03965d134c26725cbc51a57969da6c9 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63 Description: change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Homepage: https://github.com/shadow-maint/shadow Package: percona-release Status: install ok installed Priority: optional Section: misc Installed-Size: 65 Maintainer: Percona Development Team Architecture: all Version: 1.0-33.generic Depends: gnupg2 | gnupg, findutils, curl, grep, lsb-release Pre-Depends: gpgv Description: Package to install Percona gpg key and APT repos Homepage: https://www.percona.com/downloads/percona-release Package: percona-server-client Status: install ok installed Priority: extra Section: database Installed-Size: 57545 Maintainer: Percona Server Development Team Architecture: amd64 Source: percona-server Version: 8.4.8-8-1.trixie Replaces: mariadb-client, mariadb-client-5.5, mariadb-client-core-5.5, mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, percona-server-client-5.1, percona-server-client-5.5, percona-server-client-5.6, percona-server-client-5.7, percona-xtradb-client-5.0, virtual-mysql-client, virtual-mysql-client-core Provides: mysql-client, mysql-client-8.0, mysql-client-core-8.0, virtual-mysql-client, virtual-mysql-client-core Depends: percona-server-common (= 8.4.8-8-1.trixie), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libtinfo6 (>= 6) Breaks: mariadb-client, mariadb-client-5.5, mariadb-client-core-5.5, mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-8.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-8.0, percona-server-client-5.1, percona-server-client-5.5, percona-server-client-5.6, percona-server-client-5.7, percona-xtradb-client-5.0, virtual-mysql-client, virtual-mysql-client-core Conflicts: percona-server-client (<= 8.0.12) Description: Percona Server database client binaries Percona Server is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of Percona Server are speed, robustness and ease of use. . This package includes the client binaries. Homepage: http://www.percona.com/software/percona-server/ Package: percona-server-common Status: install ok installed Priority: extra Section: database Installed-Size: 11374 Maintainer: Percona Server Development Team Architecture: amd64 Multi-Arch: foreign Source: percona-server Version: 8.4.8-8-1.trixie Replaces: mysql-common, percona-server-common-5.7, percona-server-pro-common Provides: mysql-common Pre-Depends: debconf (>= 0.2.17), debsums Breaks: percona-server-common-5.7 Conflicts: percona-server-pro-common Conffiles: /etc/mysql/conf.d/mysql.cnf f64ce1ecf504d7afad4b0bda38006683 /etc/mysql/my.cnf.fallback fe11d599ef45acddd61cedf12a8f9a3c Description: Percona Server database common files (e.g. /etc/mysql/my.cnf) Percona Server is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of Percona Server are speed, robustness and ease of use. . This package includes files needed by all versions of the client library (e.g. /etc/mysql/my.cnf). Homepage: http://www.percona.com/software/percona-server/ Package: perl Status: install ok installed Priority: standard Section: perl Installed-Size: 841 Maintainer: Niko Tyni Architecture: amd64 Multi-Arch: allowed Version: 5.40.1-6 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.02.001), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.212), libcompress-raw-zlib-perl (= 2.212), libcompress-zlib-perl (= 2.212), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.032), libextutils-cbuilder-perl (= 0.280240), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.9100), libhttp-tiny-perl (= 0.088), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.212), libio-compress-bzip2-perl (= 2.212), libio-compress-perl (= 2.212), libio-compress-zlib-perl (= 2.212), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.003002), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20250118.40), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.018), libtest-harness-perl (= 3.48), libtest-simple-perl (= 1.302199), libtest-tester-perl (= 1.302199), libtest-use-ok-perl (= 1.302199), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.40), libthreads-shared-perl (= 1.69), libtime-hires-perl (= 1.9777), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9930), libversion-requirements-perl, podlators-perl (= 5.01.02) Depends: perl-base (= 5.40.1-6), perl-modules-5.40 (>= 5.40.1-6), libperl5.40 (= 5.40.1-6) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.40.1-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Conflicts: libjson-pp-perl (<< 2.27200-2) Conffiles: /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733 Description: Larry Wall's Practical Extraction and Report Language Perl is a highly capable, feature-rich programming language with over 20 years of development. Perl 5 runs on over 100 platforms from portables to mainframes. Perl is suitable for both rapid prototyping and large scale development projects. . Perl 5 supports many programming styles, including procedural, functional, and object-oriented. In addition to this, it is supported by an ever-growing collection of reusable modules which accelerate development. Some of these modules include Web frameworks, database integration, networking protocols, and encryption. Perl provides interfaces to C and C++ for custom extension development. Homepage: https://dev.perl.org/perl5/ Package: perl-base Essential: yes Status: install ok installed Priority: required Section: perl Installed-Size: 7811 Maintainer: Niko Tyni Architecture: amd64 Source: perl Version: 5.40.1-6 Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.42), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.038), libxsloader-perl (<< 0.32), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3) Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.42), libscalar-list-utils-perl (= 1:1.63), libsocket-perl (= 2.038), libxsloader-perl (= 0.32), perlapi-5.40.0, perlapi-5.40.1 Pre-Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0) Suggests: perl, sensible-utils Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 4.4.0-7~), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), duck (<< 0.14.1), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.9100), libfile-temp-perl (<< 0.2311), libgnupg-interface-perl (<< 1.02-4), libio-socket-ip-perl (<< 0.42), liblexical-failure-perl (<< 0.001000), libmp3-tag-perl (<< 1.13-1.2), libnumber-format-perl (<< 1.76), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.038), libur-perl (<< 0.470+ds-3), libxsloader-perl (<< 0.32), mailagent (<< 1:3.1-81-2), perl (<< 5.40.1~), perl-modules (<< 5.40.1~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8) Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41) Description: minimal Perl system Perl is a scripting language used in many system scripts and utilities. . This package provides a Perl interpreter and the small subset of the standard run-time library required to perform basic tasks. For a full Perl installation, install "perl" (and its dependencies, "perl-modules-5.40" and "perl-doc"). Homepage: https://dev.perl.org/perl5/ Package: perl-modules-5.40 Status: install ok installed Priority: optional Section: libs Installed-Size: 19988 Maintainer: Niko Tyni Architecture: all Multi-Arch: foreign Source: perl Version: 5.40.1-6 Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 3.02.001), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.37), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.143), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.032), libextutils-cbuilder-perl (<< 0.280240), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.9100), libhttp-tiny-perl (<< 0.088), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.15), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 2.003002), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20250118.40), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000038), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.45), libterm-table-perl (<< 0.018), libtest-harness-perl (<< 3.48), libtest-simple-perl (<< 1.302199), libtest-tester-perl (<< 1.302199), libtest-use-ok-perl (<< 1.302199), libtest2-suite-perl (<< 0.000162), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3500), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9930), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 5.01.02) Provides: perl-modules Depends: perl-base (>= 5.40.1-1) Recommends: perl (>= 5.40.1-1) Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 3.02.001), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.37), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.143), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.032), libextutils-cbuilder-perl (<< 0.280240), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.9100), libhttp-tiny-perl (<< 0.088), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.15), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 2.003002), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20250118.40), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000038), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.45), libterm-table-perl (<< 0.018), libtest-harness-perl (<< 3.48), libtest-simple-perl (<< 1.302199), libtest-tester-perl (<< 1.302199), libtest-use-ok-perl (<< 1.302199), libtest2-suite-perl (<< 0.000162), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3500), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9930), maildirsync (<< 1.2-2.1), perl (<< 5.40.1~), podlators-perl (<< 5.01.02) Conflicts: perl-modules (<< 5.22.0~) Description: Core Perl modules Architecture independent Perl modules. These modules are part of Perl and required if the `perl' package is installed. . Note that this package only exists to save archive space and should be considered an internal implementation detail of the `perl' package. Other packages should not depend on `perl-modules-5.40' directly, they should use `perl' (which depends on `perl-modules-5.40') instead. Homepage: https://dev.perl.org/perl5/ Package: pinentry-curses Status: install ok installed Priority: optional Section: utils Installed-Size: 150 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: pinentry Version: 1.3.1-2 Provides: pinentry Depends: libassuan9 (>= 2.0.1), libc6 (>= 2.38), libgpg-error0 (>= 1.14), libncursesw6 (>= 6), libtinfo6 (>= 6) Suggests: pinentry-doc Enhances: gnupg-agent Description: curses-based PIN or pass-phrase entry dialog for GnuPG This package contains a program that allows for secure entry of PINs or pass phrases. That means it tries to take care that the entered information is not swapped to disk or temporarily stored anywhere. This functionality is particularly useful for entering pass phrases when using encryption software such as GnuPG or e-mail clients using the same. It uses an open protocol and is therefore not tied to particular software. . The program contained in this package implements a PIN entry dialog using the curses tool kit, meaning that it is useful for users working in text mode without the X Window System. There are sibling packages that implement PIN entry dialogs that use an X tool kit. If you install any of the graphical packages then this package is not necessary because the sibling packages automatically fall back to text mode if X is not active. Homepage: https://www.gnupg.org/related_software/pinentry/ Package: poppler-data Status: install ok installed Priority: optional Section: misc Installed-Size: 13086 Maintainer: Hideki Yamane Architecture: all Multi-Arch: foreign Version: 0.4.12-1 Pre-Depends: dpkg (>= 1.15.6~) Suggests: poppler-utils, ghostscript, fonts-japanese-mincho | fonts-ipafont-mincho, fonts-japanese-gothic | fonts-ipafont-gothic, fonts-arphic-ukai, fonts-arphic-uming, fonts-nanum (>= 20131007~) Enhances: ghostscript Conffiles: /etc/ghostscript/cidfmap.d/90gs-cjk-resource-cns1.conf d3a491137506a332ab747c571e5bee33 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-gb1.conf 5ec7d7edc178ef73b1f6ac21a3cdc8a0 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan1.conf 9502944d3a420a2763a36517679460f4 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan2.conf 00d6b53125e159d61e2fd0a5056b4b4c /etc/ghostscript/cidfmap.d/90gs-cjk-resource-korea1.conf 76ba5a8a08376075902594b9ecd902ed Description: encoding data for the poppler PDF rendering library This package provides the CMap tables required to display PDF documents containing CJK characters with libpoppler. They were previously provided by the packages cmap-adobe-{cns1,gb1,japan1,japan2,korea1} and gs-cjk-resource. . Users who want to view or create PDF files in Chinese, Japanese, or Korean without embedded fonts will need this package. Homepage: https://poppler.freedesktop.org/ Package: procps Status: install ok installed Priority: important Section: admin Installed-Size: 2395 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Version: 2:4.0.4-9 Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2) Provides: watch Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libproc2-0 (>= 2:4.0.4), libsystemd0 (>= 254), libtinfo6 (>= 6), init-system-helpers (>= 1.29~) Recommends: psmisc, linux-sysctl-defaults Breaks: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2) Conffiles: /etc/sysctl.conf newconffile remove-on-upgrade /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f /etc/sysctl.d/README.sysctl 93eda3f215e9d29316f5597cb4551082 Description: /proc file system utilities This package provides command line and full screen utilities for browsing procfs, a "pseudo" file system dynamically generated by the kernel to provide information about the status of entries in its process table (such as whether the process is running, stopped, or a "zombie"). . It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop, snice, sysctl, tload, top, uptime, vmstat, w, and watch. Homepage: https://gitlab.com/procps-ng/procps Package: psmisc Status: install ok installed Priority: optional Section: admin Installed-Size: 950 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Version: 23.7-2 Replaces: manpages-de (<< 4.9.1-1) Depends: libc6 (>= 2.38), libtinfo6 (>= 6) Breaks: manpages-de (<< 4.9.1-1) Description: utilities that use the proc file system This package contains miscellaneous utilities that use the proc FS: . - fuser: identifies processes that are using files or sockets. - killall: kills processes by name (e.g. "killall -HUP named"). - peekfd: shows the data traveling over a file descriptor. - pstree: shows currently running processes as a tree. - prtstat: print the contents of /proc//stat Homepage: http://psmisc.sf.net/ Package: readline-common Status: install ok installed Priority: optional Section: utils Installed-Size: 89 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: readline Version: 8.2-6 Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11) Suggests: readline-doc Conflicts: libreadline-common, libreadline5 (<< 5.0-11) Description: GNU readline and history libraries, common files The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html Package: ripgrep Status: install ok installed Priority: optional Section: utils Installed-Size: 5278 Maintainer: Debian Rust Maintainers Architecture: amd64 Multi-Arch: allowed Source: rust-ripgrep (14.1.1-1) Version: 14.1.1-1+b4 Depends: libc6 (>= 2.39), libgcc-s1 (>= 4.2), libpcre2-8-0 (>= 10.22) Description: Recursively searches directories for a regex pattern ripgrep is a line-oriented search tool that recursively searches your current directory for a regex pattern while respecting your gitignore rules and automatically skip hidden files/directories (smart filtering) and binary files. ripgrep is similar to other popular search tools like The Silver Searcher, ack and grep. . ripgrep is generally faster than both The Silver Searcher and GNU grep. It defaults to recursive directory search and won't search files ignored by your `.gitignore` files. Use ripgrep if you like speed, filtering by default, fewer bugs, and Unicode support. . On the other hand, if you like multiline search, then ripgrep may not quite meet your needs (yet), and it will never support fancy regex features such as backreferences or lookaround Built-Using: rustc (= 1.85.0+dfsg3-1) Homepage: https://github.com/BurntSushi/ripgrep X-Cargo-Built-Using: rust-aho-corasick (= 1.1.3-1), rust-anyhow (= 1.0.95-1), rust-bstr (= 1.11.3-1), rust-cfg-if (= 1.0.0-1), rust-crossbeam-deque (= 0.8.5-1), rust-crossbeam-epoch (= 0.9.18-1), rust-crossbeam-utils (= 0.8.19-1), rust-encoding-rs (= 0.8.35-1), rust-encoding-rs-io (= 0.1.7-1), rust-globset (= 0.4.15-1), rust-grep-cli (= 0.1.11-1), rust-grep (= 0.3.2-1), rust-grep-matcher (= 0.1.7-1), rust-grep-pcre2 (= 0.1.8-1), rust-grep-printer (= 0.2.2-1), rust-grep-regex (= 0.1.13-1), rust-grep-searcher (= 0.1.14-1), rust-ignore (= 0.4.23-1), rust-itoa (= 1.0.14-1), rust-lexopt (= 0.3.0-1), rust-libc (= 0.2.169-1), rust-log (= 0.4.26-1), rust-memchr (= 2.7.4-1), rust-memmap2 (= 0.9.5-1), rust-pcre2 (= 0.2.9-1), rust-pcre2-sys (= 0.2.9-1), rust-regex-automata (= 0.4.9-2), rust-regex-syntax (= 0.8.5-1), rust-ryu (= 1.0.19-1), rust-same-file (= 1.0.6-1), rust-serde (= 1.0.217-1), rust-serde-json (= 1.0.139-1), rust-termcolor (= 1.4.1-1), rust-textwrap (= 0.16.1-1), rust-walkdir (= 2.5.0-1), rustc (= 1.85.0+dfsg3-1) Package: rpcsvc-proto Status: install ok installed Priority: optional Section: libs Installed-Size: 246 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1.4.3-1 Replaces: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14) Depends: libc6 (>= 2.34) Breaks: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14) Description: RPC protocol compiler and definitions rpcgen is a tool that generates C code to implement an RPC protocol. The input to rpcgen is a language similar to C known as RPC Language (Remote Procedure Call Language). . This package also includes several rpcsvc header files and RPC protocol definitions from SunRPC sources that were previously shipped by glibc. Homepage: https://github.com/thkukuk/rpcsvc-proto Package: rsync Status: install ok installed Priority: optional Section: net Installed-Size: 830 Maintainer: Samuel Henrique Architecture: amd64 Multi-Arch: foreign Version: 3.4.1+ds1-5+deb13u3 Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3t64 (>= 3.0.0), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4) Pre-Depends: init-system-helpers (>= 1.54~) Suggests: openssh-client, openssh-server, python3, python3-braceexpand Conffiles: /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5 Description: fast, versatile, remote (and local) file-copying tool rsync is a fast and versatile file-copying tool which can copy locally and to/from a remote host. It offers many options to control its behavior, and its remote-update protocol can minimize network traffic to make transferring updates between machines fast and efficient. . It is widely used for backups and mirroring and as an improved copy command for everyday use. . This package provides both the rsync command line tool and optional daemon functionality. Homepage: https://rsync.samba.org/ Package: sed Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 991 Maintainer: Clint Adams Architecture: amd64 Multi-Arch: foreign Version: 4.9-2+deb13u1 Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~) Description: GNU stream editor for filtering/transforming text sed reads the specified files or the standard input if no files are specified, makes editing changes according to a list of commands, and writes the results to the standard output. Homepage: https://www.gnu.org/software/sed/ Package: sqv Status: install ok installed Priority: optional Section: utils Installed-Size: 1855 Maintainer: Debian Rust Maintainers Architecture: amd64 Multi-Arch: foreign Source: rust-sequoia-sqv (1.3.0-3) Version: 1.3.0-3+b2 Depends: libc6 (>= 2.38), libgcc-s1 (>= 4.2), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64, libnettle8t64 (>= 3.9~) Description: OpenPGP signature verification program from Sequoia sqv is a single-purpose CLI for verifying OpenPGP signatures, designed to be used from scripts. . OpenPGP users looking for the full range of OpenPGP functionality will usually prefer sq, the Sequoia PGP project's primary CLI, which provides a richer signature verification interface and other functionality like certificate management. Built-Using: rust-buffered-reader (= 1.3.1-2), rust-nettle (= 7.3.0-1), rust-nettle-sys (= 2.3.1-1), rust-sequoia-openpgp (= 2.0.0-2+deb13u1), rust-sequoia-policy-config (= 0.8.0-1), rustc (= 1.85.0+dfsg3-1) Static-Built-Using: rust-aho-corasick (= 1.1.3-1), rust-anstream (= 0.6.15-1), rust-anstyle (= 1.0.8-1), rust-anstyle-parse (= 0.2.1-1), rust-anstyle-query (= 1.0.0-1), rust-anyhow (= 1.0.95-1), rust-argon2 (= 0.5.3-1), rust-base64 (= 0.22.1-1), rust-base64ct (= 1.6.0-1), rust-bitflags (= 2.8.0-1), rust-blake2 (= 0.10.6-3), rust-block-buffer (= 0.10.4-1), rust-buffered-reader (= 1.3.1-2), rust-cfg-if (= 1.0.0-1), rust-chrono (= 0.4.39-2), rust-clap (= 4.5.23-1), rust-clap-builder (= 4.5.23-1), rust-clap-lex (= 0.7.4-1), rust-colorchoice (= 1.0.0-1), rust-cpufeatures (= 0.2.16-1), rust-crypto-common (= 0.1.6-1), rust-digest (= 0.10.7-2), rust-dyn-clone (= 1.0.16-1), rust-generic-array (= 0.14.7-1), rust-getrandom (= 0.2.15-1), rust-iana-time-zone (= 0.1.63-1), rust-idna (= 1.0.3-2), rust-idna-adapter (= 1.1.0-1), rust-idna-mapping (= 1.0.0-1), rust-lalrpop-util (= 0.20.0-1), rust-lazy-static (= 1.5.0-1), rust-libc (= 0.2.169-1), rust-linux-raw-sys (= 0.4.14-1), rust-memchr (= 2.7.4-1), rust-memsec (= 0.7.0-1), rust-nettle (= 7.3.0-1), rust-nettle-sys (= 2.3.1-1), rust-num-traits (= 0.2.19-2), rust-password-hash (= 0.5.0-1), rust-rand-core (= 0.6.4-2), rust-regex (= 1.11.1-2), rust-regex-automata (= 0.4.9-2), rust-regex-syntax (= 0.8.5-1), rust-rustix (= 0.38.37-4), rust-sequoia-openpgp (= 2.0.0-2+deb13u1), rust-sequoia-policy-config (= 0.8.0-1), rust-serde (= 1.0.217-1), rust-sha1collisiondetection (= 0.3.2-1), rust-smallvec (= 1.13.2-1), rust-strsim-0.10 (= 0.10.0-4), rust-subtle (= 2.6.1-1), rust-terminal-size (= 0.4.1-2), rust-thiserror (= 2.0.11-1), rust-thiserror-1 (= 1.0.69-1), rust-tinyvec (= 1.6.0-2), rust-tinyvec-macros (= 0.1.0-1), rust-toml-0.5 (= 0.5.11-4), rust-typenum (= 1.17.0-3), rust-unicode-bidi (= 0.3.17-1), rust-unicode-joining-type (= 1.0.0-1), rust-unicode-normalization (= 0.1.24-1), rust-utf8-iter (= 1.0.4-1), rust-utf8parse (= 0.2.1-1), rust-xxhash-rust (= 0.8.15-1), rustc (= 1.85.0+dfsg3-1) Homepage: https://sequoia-pgp.org/ Package: sudo Status: install ok installed Priority: optional Section: admin Installed-Size: 6705 Maintainer: Debian Sudo Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1.9.16p2-3+deb13u2 Replaces: sudo-ldap Depends: libapparmor1 (>= 2.7.0~beta1+bzr1772), libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.0.2), libpam-modules Pre-Depends: init-system-helpers (>= 1.54~) Conflicts: sudo-ldap Conffiles: /etc/init.d/sudo 4fd40c92739a3bb2242df7cc6af126df /etc/pam.d/sudo 7fa5090826481c517f23faa1e21c77a8 /etc/pam.d/sudo-i 95199b1f3d5a60bcf98058d9f8b70e70 /etc/sudo.conf b802577e70ce0df065aa94feb3d0566f /etc/sudo_logsrvd.conf ad0ba586da300ae3ba46312ad744a6e2 /etc/sudoers da8bee36494c904ba767f0dd58920878 /etc/sudoers.d/README bb1eba13940f331e91cfb9294d86a04f Description: Provide limited super user privileges to specific users Sudo is a program designed to allow a sysadmin to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow people to get their work done. . This version is built with minimal shared library dependencies, use the sudo-ldap package instead if you need LDAP support for sudoers. Homepage: https://www.sudo.ws/ Package: sysvinit-utils Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 104 Maintainer: Debian sysvinit maintainers Architecture: amd64 Multi-Arch: foreign Source: sysvinit Version: 3.14-4 Replaces: lsb-base Provides: lsb-base (= 11.1.0) Depends: libc6 (>= 2.38) Conflicts: lsb-base (<< 11.3~) Description: System-V-like utilities This package contains the important System-V-like utilities. . Specifically, this package includes: init-d-script, fstab-decode, killall5, pidof . It also contains the library scripts sourced by init-d-script and other initscripts that were formerly in lsb-base. Homepage: https://github.com/slicer69/sysvinit Package: tar Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 3085 Maintainer: Janos Lenart Architecture: amd64 Multi-Arch: foreign Version: 1.35+dfsg-3.1 Replaces: cpio (<< 2.4.2-39) Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~) Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc Breaks: dpkg-dev (<< 1.14.26) Conflicts: cpio (<= 2.4.2-38) Description: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Homepage: https://www.gnu.org/software/tar/ Package: tmux Status: install ok installed Priority: optional Section: admin Installed-Size: 1209 Maintainer: Sebastien Delafond Architecture: amd64 Version: 3.5a-3 Depends: libc6 (>= 2.38), libevent-core-2.1-7t64 (>= 2.1.8-stable), libjemalloc2 (>= 2.1.1), libsystemd0 (>= 221), libtinfo6 (>= 6.5) Description: terminal multiplexer tmux enables a number of terminals (or windows) to be accessed and controlled from a single terminal like screen. tmux runs as a server-client system. A server is created automatically when necessary and holds a number of sessions, each of which may have a number of windows linked to it. Any number of clients may connect to a session, or the server may be controlled by issuing commands with tmux. Communication takes place through a socket, by default placed in /tmp. Moreover tmux provides a consistent and well-documented command interface, with the same syntax whether used interactively, as a key binding, or from the shell. It offers a choice of vim or Emacs key layouts. Homepage: https://github.com/tmux/tmux/wiki Package: tnftp Status: install ok installed Priority: optional Section: net Installed-Size: 255 Maintainer: xiao sheng wen Architecture: amd64 Source: tnftp (20230507-2) Version: 20230507-2+b1 Replaces: lukemftp Provides: ftp Depends: libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libssl3t64 (>= 3.0.0) Conflicts: lukemftp Description: enhanced ftp client tnftp is what many users affectionately call the enhanced ftp client in NetBSD (http://www.netbsd.org). . This package is a `port' of the NetBSD ftp client to other systems. . The enhancements over the standard ftp client in 4.4BSD include: * command-line editing within ftp * command-line fetching of URLS, including support for: - http proxies (c.f: $http_proxy, $ftp_proxy) - authentication * context sensitive command and filename completion * dynamic progress bar * IPv6 support (from the WIDE project) * modification time preservation * paging of local and remote files, and of directory listings (c.f: `lpage', `page', `pdir') * passive mode support, with fallback to active mode * `set option' override of ftp environment variables * TIS Firewall Toolkit gate ftp proxy support (c.f: `gate') * transfer-rate throttling (c.f: `-T', `rate') Homepage: https://en.wikipedia.org/wiki/Tnftp Package: tzdata Status: install ok installed Priority: required Section: localization Installed-Size: 1361 Maintainer: GNU Libc Maintainers Architecture: all Multi-Arch: foreign Version: 2026b-0+deb13u1 Replaces: tzdata-legacy (= 2023c-8), tzdata-legacy (= 2023c-9) Provides: tzdata-trixie Depends: debconf (>= 0.5) | debconf-2.0 Breaks: tzdata-legacy (= 2023c-8), tzdata-legacy (= 2023c-9) Description: time zone and daylight-saving time data This package contains data required for the implementation of standard local time for many representative locations around the globe. It is updated periodically to reflect changes made by political bodies to time zone boundaries, UTC offsets, and daylight-saving rules. Homepage: https://www.iana.org/time-zones Package: unzip Status: install ok installed Priority: optional Section: utils Installed-Size: 387 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 6.0-29 Depends: libbz2-1.0, libc6 (>= 2.34) Suggests: zip Description: De-archiver for .zip files InfoZIP's unzip program. With the exception of multi-volume archives (ie, .ZIP files that are split across several disks using PKZIP's /& option), this can handle any file produced either by PKZIP, or the corresponding InfoZIP zip program. . This version supports encryption. Homepage: https://infozip.sourceforge.net/UnZip.html Package: util-linux Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 4961 Maintainer: Chris Hofstaedtler Architecture: amd64 Multi-Arch: foreign Version: 2.41-5 Replaces: hardlink Provides: hardlink Pre-Depends: libpam-modules, libpam-runtime, libblkid1 (= 2.41-5), libc6 (>= 2.41), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), liblastlog2-2 (= 2.41-5), libmount1 (= 2.41-5), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (= 2.41-5), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (= 2.41-5) Recommends: sensible-utils Suggests: dosfstools, kbd, util-linux-extra, util-linux-locales, wtmpdb Conflicts: hardlink Conffiles: /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f Description: miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to view kernel messages, create new filesystems, view block device information, interface with real time clock, etc. Homepage: https://github.com/util-linux/util-linux Package: valkey-tools Status: install ok installed Priority: optional Section: database Installed-Size: 6961 Maintainer: Lucas Kanashiro Architecture: amd64 Source: valkey Version: 8.1.1+dfsg1-3+deb13u2 Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.38), libjemalloc2 (>= 4.0.0), liblzf1 (>= 1.5), libssl3t64 (>= 3.0.0), libsystemd0 Suggests: ruby-redis Description: Persistent key-value database with network interface (client) Valkey is a key-value database in a similar vein to memcache but the dataset is non-volatile. Valkey additionally provides native support for atomically manipulating and querying data structures such as lists and sets. . This package contains the command line client and other tools. Homepage: https://valkey.io Package: vim Status: install ok installed Priority: optional Section: editors Installed-Size: 3930 Maintainer: Debian Vim Maintainers Architecture: amd64 Version: 2:9.1.1230-2 Provides: editor Depends: vim-common (= 2:9.1.1230-2), vim-runtime (= 2:9.1.1230-2), libacl1 (>= 2.2.23), libc6 (>= 2.38), libgpm2 (>= 1.20.7), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6) Suggests: ctags, vim-doc, vim-scripts Description: Vi IMproved - enhanced vi editor Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains a version of vim compiled with a rather standard set of features. This package does not provide a GUI version of Vim. See the other vim-* packages if you need more (or less). Homepage: https://www.vim.org/ Package: vim-common Status: install ok installed Priority: important Section: editors Installed-Size: 1864 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: vim Version: 2:9.1.1230-2 Replaces: vim-runtime (<< 2:9.0.1658-1~) Recommends: xxd, vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny Breaks: vim-runtime (<< 2:9.0.1658-1~) Conffiles: /etc/vim/vimrc 268a4e1ec0b630f6b75c83f618229c88 Description: Vi IMproved - Common files Vim is an almost compatible version of the UNIX editor Vi. . This package contains files shared by all non GUI-enabled vim variants available in Debian. Examples of such shared files are: manpages and configuration files. Homepage: https://www.vim.org/ Package: vim-runtime Status: install ok installed Priority: optional Section: editors Installed-Size: 38417 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: vim Version: 2:9.1.1230-2 Recommends: vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny Breaks: vim-tiny (<< 2:9.1.1230-2) Enhances: vim-tiny Description: Vi IMproved - Runtime files Vim is an almost compatible version of the UNIX editor Vi. . This package contains vimtutor and the architecture independent runtime files, used, if available, by all vim variants available in Debian. Example of such runtime files are: online documentation, rules for language-specific syntax highlighting and indentation, color schemes, and standard plugins. Homepage: https://www.vim.org/ Package: wget Status: install ok installed Priority: standard Section: web Installed-Size: 3784 Maintainer: Noël Köthe Architecture: amd64 Multi-Arch: foreign Version: 1.25.0-2 Depends: libc6 (>= 2.38), libgnutls30t64 (>= 3.8.1), libidn2-0 (>= 0.6), libnettle8t64, libpcre2-8-0 (>= 10.22), libpsl5t64 (>= 0.16.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: wget-ssl Conffiles: /etc/wgetrc c43064699caf6109f4b3da0405c06ebb Description: retrieves files from the web Wget is a network utility to retrieve files from the web using HTTP(S) and FTP, the two most widely used internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as FTP sites -- you can use Wget to make mirrors of archives and home pages or to travel the web like a WWW robot. . Wget works particularly well with slow or unstable connections by continuing to retrieve a document until the document is fully downloaded. Re-getting files from where it left off works on servers (both HTTP and FTP) that support it. Both HTTP and FTP retrievals can be time stamped, so Wget can see if the remote file has changed since the last retrieval and automatically retrieve the new version if it has. . Wget supports proxy servers; this can lighten the network load, speed up retrieval, and provide access behind firewalls. Homepage: https://www.gnu.org/software/wget/ Package: whois Status: install ok installed Priority: standard Section: net Installed-Size: 388 Maintainer: Marco d'Itri Architecture: amd64 Version: 5.6.3 Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libidn2-0 (>= 0.6) Description: intelligent WHOIS client This package provides a commandline client for the WHOIS (RFC 3912) protocol, which queries online servers for information such as contact details for domains and IP address assignments. It can intelligently select the appropriate WHOIS server for most queries. . The package also contains mkpasswd, a features-rich front end to the password encryption function crypt(3). Package: x11-common Status: install ok installed Priority: optional Section: x11 Installed-Size: 275 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xorg Version: 1:7.7+24+deb13u1 Depends: lsb-base Conffiles: /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0 /etc/X11/Xsession 9383a93bc2172001d9b9f46de7dd2256 /etc/X11/Xsession.d/20x11-common_process-args 6a713578b550facd68a3d9b7be9ddcc7 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d /etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1 /etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43 Description: X Window System (X.Org) infrastructure x11-common contains the filesystem infrastructure required for further installation of the X Window System in any configuration; it does not provide a full installation of clients, servers, libraries, and utilities required to run the X Window System. . A number of terms are used to refer to the X Window System, including "X", "X Version 11", "X11", "X11R6", and "X11R7". The version of X used in Debian is derived from the version released by the X.Org Foundation, and is thus often also referred to as "X.Org". All of the preceding quoted terms are functionally interchangeable in an Debian system. Homepage: https://www.x.org/ Package: xfonts-encodings Status: install ok installed Priority: optional Section: x11 Installed-Size: 667 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Version: 1:1.0.4-2.2 Replaces: xfonts-base (<< 1:1.0.0) Depends: x11-common Description: Encodings for X.Org fonts This package contains the encodings that map to specific characters. Package: xfonts-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 429 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: foreign Version: 1:7.7+7 Depends: libc6 (>= 2.38), libfontenc1 (>= 1:1.1.8), libfreetype6 (>= 2.6), zlib1g (>= 1:1.1.4), x11-common, xfonts-encodings Description: X Window System font utility programs xfonts-utils provides a set of utility programs shipped with the X Window System that are needed for font management. . The programs in this package include: - bdftopcf, which converts BDF fonts to PCF fonts; - bdftruncate and ucs2any, tools to generate fonts with various encodings from ISO 10646-encoded fonts - mkfontdir, a program to generate fonts.dir files; - mkfontscale, a program to generate fonts.scale files; - fonttosfnt, a program to wrap bitmap fonts in a sfnt (TrueType) wrapper. Package: xz-utils Status: install ok installed Priority: standard Section: utils Installed-Size: 1424 Maintainer: Sebastian Andrzej Siewior Architecture: amd64 Multi-Arch: foreign Version: 5.8.1-1 Replaces: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), xz-lzma Provides: lzma Depends: libc6 (>= 2.34), liblzma5 (>= 5.6.2) Breaks: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), pristine-tar (<< 1.50+nmu1) Conflicts: lzma (<< 9.22-1), xz-lzma Description: XZ-format compression utilities XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the command line tools for working with XZ compression, including xz, unxz, xzcat, xzgrep, and so on. They can also handle the older LZMA format, and if invoked via appropriate symlinks will emulate the behavior of the commands in the lzma package. . The XZ format is similar to the older LZMA format but includes some improvements for general use: . * 'file' magic for detecting XZ files; * crc64 data integrity check; * limited random-access reading support; * improved support for multithreading (not used in xz-utils); * support for flushing the encoder. Homepage: https://tukaani.org/xz/ Package: zip Status: install ok installed Priority: optional Section: utils Installed-Size: 627 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 3.0-15 Depends: libbz2-1.0, libc6 (>= 2.34) Recommends: unzip Description: Archiver for .zip files This is InfoZIP's zip program. It produces files that are fully compatible with the popular PKZIP program; however, the command line options are not identical. In other words, the end result is the same, but the methods differ. :-) . This version supports encryption. Homepage: https://infozip.sourceforge.net/Zip.html Package: zlib1g Status: install ok installed Priority: optional Section: libs Installed-Size: 173 Maintainer: Mark Brown Architecture: amd64 Multi-Arch: same Source: zlib (1:1.3.dfsg+really1.3.1-1) Version: 1:1.3.dfsg+really1.3.1-1+b1 Provides: libz1 Depends: libc6 (>= 2.14) Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2023.20230311.66589-8) Conflicts: zlib1 (<= 1:1.0.4-7) Description: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the shared library. Homepage: http://zlib.net/